Another way to isolate your editing to the extensisons_custom.conf might be to create a custom context as the destintion for your DID.
-----Original Message----- From: Claudius Fortis [mailto:[EMAIL PROTECTED] Sent: Thursday, May 18, 2006 10:45 AM To: Shidan; Alex Robar Cc: [email protected] Subject: RE: [on-asterisk] DID routing help Shidan, Everyone before me is right...it's best (in [EMAIL PROTECTED]) to edit your config. But I think you might want make sure that the context in it is well pointed out... One of the reason I think, u'r unable to troubleshoot this is probably b/c your exten line has got a little typo in it... exten => 14161234567,2,Dial(SIP/[EMAIL PROTECTED],,60,r ) After 111.111 you have 2 commas (,,) instead of one..... Well, to be absolutely sure, do the following: - call that DID and take a look @ your Asterisk Log..... - try to ring an internal extension first.....something like exten => 14161234567,2,Dial(SIP/200) Hoping that helps, well, that's my 2 cents ... Claudius -----Original Message----- From: Shidan [mailto:[EMAIL PROTECTED] Sent: May 17, 2006 6:48 PM To: Alex Robar Cc: [email protected] Subject: Re: [on-asterisk] DID routing help Doh! thats what I meant. I always get those two confused. ----- Shidan On 5/17/06, Alex Robar <[EMAIL PROTECTED]> wrote: > > > > Shidan, > > Just a note here: Don't edit the *_additional.conf files. These will > always be overwritten by FreePBX when you make a change. Everything in > the *_custom.conf files is safe to edit, and the GUI does not touch those files. > > Alex > > > > -----Original Message----- > From: Shidan [mailto:[EMAIL PROTECTED] > Sent: Wed 5/17/2006 6:15 PM > To: [EMAIL PROTECTED] > Cc: [email protected] > Subject: Re: [on-asterisk] DID routing help > > 3 things you can do: > 1) use the additional.conf files and it will place everything in the > right contexts > > 2) erase all the conf entries and build your own dialplan, then never > use freepbx asit will overwrite it. > > 3) use the freepbx interface > > Id try 1 if I were you. > > On 5/17/06, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote: > > On 17 May 2006 at 13:57, Syed ZIA wrote: > > > > > > > > Hello folks, with your help I am able to run my [EMAIL PROTECTED] > 2.7 now.... everything seems fine > > but I have one issue... I have > a DID fromandall i need to do is receive this DID on my box and > > > get it transfered to my PSTN gateway through a SIP URI... I am getting > this DIDto my box as i > > can see it on the CDR but some how its not > going any where > > > > here is what i am doing in my config > files.....Just to let you know I am using the default sip.conf > > > files and extentions.conf which came with the installation........... > I just added these lines in it. > > > > Isn't the point [EMAIL PROTECTED] to use the GUI, I would say if you start > editing > configs by hand, you're going to run into all sorts of > issues > > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: [EMAIL PROTECTED] > For > additional commands, e-mail: [EMAIL PROTECTED] > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] For additional > commands, e-mail: [EMAIL PROTECTED] > > > > > > > > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
