Thanks, for me even, the FXS cards are not giving a dial tone. I used kernel -> 2.6.17, wanpipe -> wanpipe-beta6-2.3.4, Asterisk -> 1.2.1 and zaptel -> 1.2.7. I sent an email to Sangoma support and haven't got any reply back, may be they will contact me on Monday.
Abjin _____ From: Jag Basrai [mailto:[EMAIL PROTECTED] Sent: Saturday, July 29, 2006 10:18 PM To: Abjin Haneef; [email protected] Subject: RE: [on-asterisk] Asterisk with Sangoma A200 Hi Abjin, As Alex recomended I would also highly suggest contacting Sangoma, I recently installed an A200 card that had a few problems and they were great taking the time to log in and work on the problem. One thing that I noticed when calling to an A200 card at home was if other phones (regular non-voip phones) were on the same CAT 3 network then I would not see anything occur on Asterisk even though everything was running. What I had to do was connect the Asterisk box to the main incomming line in the basement. Not sure what configuration you have, but for me I have a bell line that comes in from the outside and goes into a patch panel. Before it reaches the patch panel it goes through an outlet where I can disconnet the line going to the patch panel and connect asterisk directly to the line from the outside. Also what version of asterisk, linux kernel, and wanpipe drivers are you running? I had problems with Linux kernel 2.6.17 with wanpipe drivers pre-beta6 i think it was. I was forced to use kernel 2.6.15 and drivers beta4 as I was getting CallerID problems. Also there was a problem in asterisk 1.2.10 where the 3rd event in asterisk would cause it to crash. Check the website as David from Sangoma said he would place the fix on the website. Hope that helps -- Jag Basrai _____ > From: [EMAIL PROTECTED] > To: [email protected] > Date: Sat, 29 Jul 2006 17:40:38 -0400 > Subject: [on-asterisk] Asterisk with Sangoma A200 > > Hi Everyone, > > Has anyone experienced this issue? I installed a Sangoma A200 card (2 FXO, 2 > FXS) on my Asterisk server and installed wanpipe driver without any problem. > I can start zaptel, wanrouter and asterisk. The issue is I cannot get a dial > tone on the extensions and asterisk does not answer any calls. Can anyone > help me to get A200 working with Asterisk? > > > > Thanks > > > > Abjin > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > _____ Be one of the first to try Windows Live Mail. Windows Live Mail. <http://ideas.live.com/programpage.aspx?versionId=5d21c51a-b161-4314-9b0e-49 11fb2b2e6d>
