Hi Terry, First of all, you should upgrade to the latest stable Zaptel/Asterisk/Digium firmware. If you can't do that try to add a "h,Hangup", which is (according to people close to Digium) bad. This used to be the workaround in the early Zaptel/Asterisk days. However, we would have to see your dialplan to figure out if there might be a problem there. Plus your "features.conf" file. If all else fails, pick up a Sangoma card... :-) -- Bjorn
________________________________ From: allway all [mailto:[EMAIL PROTECTED] Sent: Wednesday, August 30, 2006 8:00 PM To: [email protected] Subject: [on-asterisk] Calls can't hangup Hi all, I met a bug @ AAH and need helps. My asterisk box are installed TDM400P with two FXO modules/two FXS and run on AAH 1.2.8 . When dialing 9+local phone number to make a call by an internal phone, it works well go through outbound zap/1. But if press "#" key or hook quickly, the outbound zap/1 will start music holding on and can't be hung-up; Making another call, the second line zap/2 will be occupied. When you hang-up the call, the second Zap/2 also will be hung on and make a native bridge Zap/1 and Zap/2. After that, the two outbound lines are all busy whenever making calls or incoming calls. Any your guys have experience to modify configuration file and fix up the problem? I hope the zap lines can be hung up whatever to dial or press phone buttons after hangup. It would be really appreciated if you someone can help me here and thank you in advance. Thanks Terry
