Hi Bernie, What mode are you sending DTMF in? Check for "dtmfmode=???" in your sip.conf file. I've had some ATAs that require dtmfmode=inband to work, and others that require dtmfmode=rfc2833. Other options are "info" and "auto", though I've heard rumblings that neither really works that well. Try experimenting with dtmfmode and see if that fixes the issue for you.
Alex ________________________________________________ Alex Robar, GearyTech Inc. Support 3075 Fourteenth Avenue, Unit 3, Markham, ON. L3R 0G9 Phone: 905-513-8000 x 223 Fax: 905-513-8040 [EMAIL PROTECTED] www.gearytech.com Installation, support and strategic direction for your computer network Add/change/modify your own service requests at: http://connect.gearytech.com/support Need help logging in? email: [EMAIL PROTECTED] for your login/password. -----Original Message----- From: Bernie Borgmann [mailto:[EMAIL PROTECTED] Sent: Friday, September 08, 2006 11:26 AM To: [email protected] Subject: [on-asterisk] SIP phone VM issue GNET Hi I have the GNET VP104S sip phone everything with this phone works great except when I try to retrieve my VM or send any commands to the asterisk server. The phone does not allow me to pass account or password information to the PBX. I can hear the tones being generated but the otherside does not. Any ideas. Also I have the newer firmware that allows me to do IAX and it works fine. But I need the SIP. I have x-lite softphones and they work fine. Any one else had this issue Cheers Bernie --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
