Hi I have the same question what was posted on the http://www.voip-info.org/wiki/view/Linksys+PAP2+Unlocking+Methods
Thanks 2007-02-23 There is a graphic that I saw that purports to show the location of reset jumper pads on the majority of newer PAP-2 version 1 boards, which apparently do not have the jumper pins and shorting block that older boards have. In the photo below, there are red circles around the purported jumper pads (to the right of the phone line jacks). I do not know precisely how these are used (I've never had to use that method), but I would suppose either you short the pads while powering the unit up, or perhaps while doing a factory reset (of course you would only do that while the adapter is not connected to the Internet). I do not recommend that anyone experiment with this because if the information I received is wrong, you could damage your adapter. But if it's a choice between using a unit as a paperweight and trying the jumpers, I suppose I'd try them at least. If anyone can provide more information on unlocking a PAP-2 by using the jumper pads, please post it. Dmitri Smirnoff
