Ok, so I have made entries for
extensions.conf
sip.conf
and the ata will not ring, when I use the softphone to call the
ip/extension #/name.
Note, the sjphone I can see register with CLI when asterisk is running,
however I do not see the ata attempt this... all the settings SEEM to be
correct.
Am I missing something?
Thomas
sacha panasuik wrote:
Thomas,
If your asterisk server is on the same 192.168.0.x network, there is
no need for either the NAT enable nor the stun server. I don't use
this particular ATA (preferring the Sipura 2/3xxx series myself), but
your settings look overall correct, assuming you have created an
extension on your asterisk server named "housephone" with a password
of "mypassword".
On 3/27/07, *Thomas Keats* <[EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]>> wrote:
I am having some trouble setting up a SIPCOM ata-1000 to register with
asterisk.
Asterisk DOES recognise the SJPhone I have installed on my XP Box at
192.168.0.1 <http://192.168.0.1>
The ATA is on a static at 192.168.0.100 <http://192.168.0.100>
without dhcp
[admin screen]
NAT Support
NAT mapping Enable: yes
Substitute VIA Addr: yes
STUN Test Enable: no
Ext IP: [empty]
NAT Keep Alive Enable: yes
STUN Enable: yes
STUN Server: http://stun01.sipphone.com
No Proxy setup (Is my proxy the asterisk box? or the gateway for the
internet?)
User Account Setup is as follows
Display name: House Phone
User ID: housephone
password: mypassword
Use Auth ID: No
Auth ID: [empty]
Time and date are wrong on the ATA, how do I fix this?
I would love to simply plug my cordless into this ata and use the
asterisk box FINALLY without having to sit at the computer... Can
someone give me a glimpse into what I am doing wrong, or missing?
Thomas
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]>
For additional commands, e-mail: [EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]>
