Are X100Ps considered supported?
> -----Original Message-----
> From: Michael Potocki [mailto:[EMAIL PROTECTED]
> Sent: April 14, 2007 12:36 AM
> To: [email protected]
> Subject: [on-asterisk] X101P Clone No CallerID
>
> Hello Everyone,
>
> Somewhat new to the Asterisk system, have been configuring it the last few
> months. I went ahead and put in an X101P Clone card to do some actual zap
> configuration and testing.
>
> The calls work both ways on incoming and outgoing. The issue I am having
> is
> there is no callerid on the incoming side through the Zap X101P device.
>
> I did do some searching online and could not find anything that gave a
> conclusive "Where to look for" answer.
>
> There is callerid on the POTS line, I tested and made sure it was passing
> the information to a normal handset.
>
> Basic questions:
> Does the X101P support callerid?
> Is there something simple that I am missing here?
>
> The logs do NOT show any callerid coming across the device.
>
> The configuration on the test box is:
> Fedora FC5 lastest patch
> Asterisk 1.4.2
> Loaded zaptel but NOT libpri
> X101P clone has ambient firmware
>
> zaptel.conf
> fxsks=1
> loadzone = us
> defaultzone=us
>
> zapata.conf
> [channels]
> context=incoming2
> signalling=fxs_ks
> busydetect=1
> busycount=7
> callwaiting=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> cancallforward=yes
> echocancelwhenbridged=yes
> rxgain=0.0
> txgain=0.0
> callerid=asreceived
> language=en
> usecallerid=yes
> hidecallerid=no
> echocancel=yes
> transfer=yes
> immediate=no
> musiconholdÞfault
> ringtimeout00
> cidsignalling¾ll
> cidstart=ring
> group=1
> callgroup=1
> pickupgroup=1
> channel => 1
>
> extensions.conf
> [incoming2]
> ; incoming2 calls from the FXO port are directed to this context from
> zapata.conf
> exten => s,1,Wait(10)
> exten => s,2,Answer( )
> exten => s,3,Noop('Callerid is '${CALLERID})
> exten => s,4,Noop('Calleridname is '${CALLERIDNAME})
> exten => s,5,Noop('Calleridnum is '${CALLERIDNUM})
> exten => s,6,Dial(SIP/mike,20,r)
> ....
> ....
>
>
> Thanks,
> Michael Potocki
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [EMAIL PROTECTED]
> For additional commands, e-mail: [EMAIL PROTECTED]
