This may be a shot in the dark but have you checked the MTU size? You
may have one set at 1500 and the other at 1492.
Bruce Nik wrote:
Hello everyone,
My Linksys WRT54GP2 registers nicely with my TBox but once I dial out
the native bridge between Tbox trunk and WRT54GP2 fails (I knwot his
from CLI logs). I know something is wrong with my network setup; plz
help me find it. This is my setup:
Internet => DSL Modem/Router Combo => WRT54GP2
Internet => DSL Modem/Router Combo => TBox
DSL uses ip range: 192.18.2.x
WRT54GP2 uses same ip range: 192.168.2.x and infact has 192.168.2.10
They are both on same subnet: 255.255.255.0
DHCP is turned on on DSL Modem/Router combo but it is disabled on
WRT54GP2.
I know why the native bridge doesn't happen though. It happens because
if I have a PC connected to main DSL Modem/router it can not ping
WRT54GP2 even though WRT54Gp2 has obtained the 192.168.2.10 ip. But,
if I connect PC directly to WRT54GP2 directly then I can browse
internet and also browse admin page for WRT54GP2.
Any solutions? Basically I want to cascade these two routers but it
doesn't seem to work :(
thanks
------------------------------------------------------------------------
Get news, entertainment and everything you care about at Live.com.
Check it out! <http://www.live.com/getstarted.aspx%20>
