Thanks Simon. Yes, my network was what you suggested. I will make the additional config on my *server tonight and try it.
On the same token, can you suggest any additional config required for IAX2? I am also having problem with IAX2 traffic too. Thanks a lot! Richard ----- Original Message ----- From: "Simon P. Ditner" <[EMAIL PROTECTED]> To: "Richard (Rogers @ work)" <[EMAIL PROTECTED]> Cc: <[email protected]> Sent: Thursday, May 31, 2007 11:54 AM Subject: Re: [on-asterisk] Allow inbound SIP traffic thru d-link router > Is this what your network looks like? > > [Asterisk] -- [Dlink Router] -- (Internet) -- [Phone] ? > > On the Asterisk server, you will need the following in your sip.conf: > > externip = <public IP address of your connection> > > or: > > externhost=<DNS name, i.e. home.dyndns.org> > externrefresh=10 > > You might also need to put the following in your phone's profile: > > [phone1] > nat=yes > > In rtp.conf, you should see a range of UDP ports that should likely be > forwarded to your asterisk box in your D-Link router as well. i.e.: > > rtpstart=10000 > rtpend=20000 > > Cheers, > spd > > On Thu, 31 May 2007, Richard (Rogers @ work) wrote: > > > Hi, > > > > I know there was a session on SIP last night but I was unable to attend. I > > am hoping some of you could help me out based on what you learned. > > I am having problem getting my router to work with my Sip phone which is > > connecting from the internet to my asterisk server. > > > > I am not able to get the voice channel thru my router. And my SIP phone > > sometimes register with the server successfully but sometime not. > > I opened up both TCP and UDP port 5060 to point to my * server. > > > > Is there anything else I have to add? I am not sure how I would add a range > > of ports to my * server. > > > > Thanks, > > Richard > > > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] >
