Hi Reza, It's exactly what I believed too and that's why I kept on trying different options. The sniffing helped me a lot from not even able to register to get registered, to be able to do outbound call etc. But something I found out also lead me to doubt the compatibility as well.
For example, the provider's sip gateway will send to my asterisk box two invite message when there is a inbound call. The first one with ulaw,alaw,g729 options and get my server matched with ulaw and the provider's sip gateway ack this negotiation as well. But then right after the provider's sip gateway send another invite which has only g729 codec option and as my box doesn't have support for that, the call get dropped. On the other hand, x-lite just ignore the second invite and keep using the first one fine. This is just one example and there are some other issues as well. I don't know where the trick is but if anyone knows how to config asterisk pretty much mimic the x-lite, I would love to hear. Thanks again for your time. John Reza - Asterisk Enthusiast wrote: > Hello John: > > There's really no need to break your back over sniffing the packets > here. The solution is quite simple. If your xLite softphone works > with their service - then it will work with your Asterisk 100%. > There's a hint! > > Cheers! > Reza. > > ----- Original Message ----- From: "Jli" <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Thursday, June 07, 2007 7:17 PM > Subject: [on-asterisk] Anyone had success to connect with ciktel? > > >> Hi, >> >> I recently signed up with this voip provider at www.ciktel.com. The >> sales guy told me as they are using SIP so it should be fine with my *. >> Although they don't have any document to help me,I thought I was brave >> to take the adventure of integrate their service into my * box which has >> been working with other voip providers for over a year. First I managed >> to test it successfully with x-lite softphone. Then I tried to debug, >> sniffer etc for about 3 days now. The tech support there asked me to try >> different adapter but that's not what I want. Anyway, it turned out I am >> running out ideas and could not get it up and running properly. I don't >> want to get into pages of debug/sniffer data again as I am pretty tired. >> I just want to know if anyone did make it with your * box and could you >> please paste the config? >> >> Thanks. >> >> John Li >> >> --------------------------------------------------------------------- >> To unsubscribe, e-mail: [EMAIL PROTECTED] >> For additional commands, e-mail: [EMAIL PROTECTED] >> >>
