"Right-on-soul brother" [featuremap] blindxfer => ## ; Blind Transfer disconnect => ** ; Disconnect Call automon => *1 ; One Touch Record ;atxfer => *2 ; Attended Xfer
Henry < Simon P. Ditner> > I beleive you can get away without doing hook flashes using one of the > 't', or 'T' options in your Dial command. The analog line can then press > the feature code listed in features.conf to initiate a call transfer. > > On Wed, 18 Jul 2007, Henry L.Coleman wrote: > >> Hi David, you may be able to use a hook switch "Flash" or use a LINK >> button >> which is a timed hook switch flash. >> Henry >> >> < David Steele> >> > Hi, >> > >> > I need to allow a person that answers a call on an Asterisk system to >> > transfer the call. Is there any way to do this with star codes (or >> > similar)? The legacy ATA I'm using (FXS ports on a Cisco router) does >> not >> > support the functionality - my only option is in-band signalling back >> to >> > the >> > Asterisk box. >> > >> > TIA, >> > Dave. >> > >> >> >> -- >> Henry L. Coleman. >> >> >> >> --------------------------------------------------------------------- >> To unsubscribe, e-mail: [EMAIL PROTECTED] >> For additional commands, e-mail: [EMAIL PROTECTED] >> >> > > -- Henry L. Coleman. --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
