Hi Claudius, Andrew and all,
You guys are great! I was away for a couple of days... come back and
there is the solution in my mailbox!
Indeed, the SIPAddHeader(Alert-Info:Bellcore-rx) is the answer to my
question about getting distinctive ring with a sipura device. Perfect!
I have yet to implement your suggestion re call screening Claudius, but
tomorrow's another day.
Having a lot of fun with asterisk and this list (all members) is very
helpful. Thanks again!
Hopefully, soon, I'll be able to answer other people's questions.
--terry
On Fri, Sep 21, 2007 at 11:18:02PM -0400, Claudius Fortis wrote:
>
> You can also try to use the Alert-Info variable, but you'll have to see if
> your device supports it.
> ==> Agree with Andrew.
>
> And to add to it, you just need to set your Alert-Info before calling the
> extension, defining it with the Bellcore info found on your SPA config
> pages... my PAP2 supports ring cadence and I'm sure your device will as well.
>
> A simple example to build your script from would be
> exten => _X.,1,SIPAddHeader(Alert-Info:Bellcore-r5)
> exten => _X.,n,Dial(SIP/200,30)
>
> A good place to get you started
> http://www.ip6net.net/voip-info.org/wiki/view/Asterisk+settings+Broadvoice+distinctive+ring+support.html
>
> That's my 2 cents, hth
>
> Claudius
> ________________________________________
> From: Andrew Heagle [EMAIL PROTECTED]
> Sent: Thursday, September 20, 2007 10:53 PM
> To: [email protected]
> Subject: Re: [on-asterisk] mwi signalling, distinctive ringing and vocal
> callerid
>
> On September 18, 2007 21:52:12 terry D. Cudney wrote:
> > Hi folks,
> >
> <snip>
> >
> > 2) Incoming callers are presented with an IVR to allow them to choose
> > who
> > they wish to talk to/leave a message for. Since incoming calls are usually
> > received on one of the pots phones (not separate extensions/sip-phones) i'd
> > like to have distinctive ringing depending on who the call is targeted for.
> > The Spa-3102 appears to allow distictive ringing for up to eight different
> > callers, not call recipients. Does anyone familiar with the spa-3102 or
> > 3000 haveany suggestions on how to make the pots phones ring distinctively
> > for each call recipient? I'm thinking of kludging it, by putting a
> > different callerid in before dialing the spa, so that it will ring a
> > different ring for each family member. Not very elegant but it should
> > work... any better ideas?
>
> Hi,
>
> I think what you are looking for is called "Ring Cadence" which is what is
> used to make different rings. This page may be of some help:
> http://www.voip-info.org/wiki/view/Asterisk+indications+default
>
> You can also try to use the Alert-Info variable, but you'll have to see if
> your device supports it.
>
> You can also change the ring using the dial command on zap channels.
> http://www.voip-info.org/wiki/index.php?page=Asterisk+Zap+channels
>
> I haven't tried it yet though, so let us know how it goes
>
> HTH,
> Andrew
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [EMAIL PROTECTED]
> For additional commands, e-mail: [EMAIL PROTECTED]
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [EMAIL PROTECTED]
> For additional commands, e-mail: [EMAIL PROTECTED]
>
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
