You need to make it 3 rings [ring ring]---[CLID]---[ring ring]
Wait until the start of third ring and you should get it. Jim -- Jim Van Meggelen [EMAIL PROTECTED] http://www.oreillynet.com/pub/au/2177 "A child is the ultimate startup, and I have three. This makes me rich." Guy Kawasaki -- > -----Original Message----- > From: Syd Carter [mailto:[EMAIL PROTECTED] > Sent: December 11, 2007 6:31 PM > To: TAUG > Subject: [on-asterisk] Caller ID not decoded for calls rec'd > with distinctive ring > > Does anyone have a solution to Caller ID not being translated > when a call comes in with distinctive ring (Long distance > ring). I've recorded the audio using Ztmonitor and verified > that Caller ID is being sent. > The difference is that Caller ID is sent after then second > ring (which is a double ring) for long distance calls. Here > is an excerpt from zapata.conf > > usecallerid=yes > hidecallerid=no > cidsignalling=bell > callerid=asreceived > sendcalleridafter=2 > callwaiting=yes > cidstart=ring > usecallingpres=yes > callwaitingcallerid=yes > rxgain=3.0 > txgain=0.0 > > I am using an X100P as the FXO. I also have a Spa3000 > connected to the PSTN. It is able to read Caller ID on calls > with distinctive ring. If I can't find a solution then maybe > someone can guide me on how to > request the sip header from that channel? Thanks.. > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] For > additional commands, e-mail: [EMAIL PROTECTED] > > > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
