You need to specify the following in the dialplan for the appropriate line:
<:000>S0 where 000 is the number to be called. Note this is from memory, so if it doesn't work, email back and I'll do some more digging. -- Nabeel Jafferali X2 Networks From: Wes Newbold [mailto:[EMAIL PROTECTED] Sent: October-16-08 2:17 PM To: [email protected] Subject: [on-asterisk] HELP: Linksys PAP2T Hotline Hi All, Hopefully someone has done this before; I need to configure a Linksys ATA with hot lining. End result would be that the ATA is connected to an intercom system, when the intercom system goes off hook, the ATA dials the DID / extension of the receptionist. Unfortunately the ATA doesn't cooperate with the hotline feature that's part of the softswitch (though IP phones work fine)... :( Any help would be appreciated, Wes Newbold Project Manager - Implementations OneConnect Services Inc. | Tel: 416.204.0438 | Fax: 866.856.4366 | 48 Yonge Street, Suite 410 | Toronto, ON, M5E 1G6 www.oneconnect.ca<http://www.oneconnect.ca/> [cid:[email protected]]
