Hello, I'm running some conduit between buildings (to later install fiber) and there's a few items I'm not sure about. Does anyone have any knowledge or experience with running conduit underground? Here's a few specifics of the plan:
-we're using 2" PVC DUCT conduit -the buildings we are connection are around 600-800ft apart. The plan is to put a pull station every 300ft or so. The runs are fairly straight. -we're burying the conduit about 36", so its below the frost line -considering using underground pulling boxes in the middle of runs and wall/post mounted enclosures at buildings (which will also store slack fiber) There's a few details I'm not sure about: -what type of boxes are available to mount outside buildings where the conduit comes up to - the conduit is going to be used to run indoor/outdoor fiber. I would like to have maybe 50ft or so excess fiber coiled up outside the building in the box where the conduit comes up out of the ground -any specifics on mounting the box on buildings to allow easy pulling -suggestions for methods to setup pulling stations in the ground to allow easy pulling and excess fiber storage. I can sketch out the site plan and other plans if it would be helpful. Thanks, Steven --- cell: 416-618-1354
