Juan,
My first suggestion would be not to do this sort of thing on the
trixbox, but do it on a separate machine, using something like pfSense
which is designed to handle multiple WAN connections.
If you really want to do this on the trixbox you'll have to look here :
http://lartc.org/
Good luck,
Mike
Juan Sicardi wrote:
Hi All,
Scenario: trixbox 2.6.1.13 with dual NICs (eth0 and eth1); both have
internal IPs on different subnets, with external IPs port-forwarding
IAX2 traffic through different internet providers (for failover
redundancy).
Problem: traffic coming in from both eth0 and eth1 is replying back only
through eth0, unless I set up eth1's gateway as default causing to send
all responses through eth1 instead.
Goal: return traffic back through the source interface it came from.
I've been trying different routes and playing with iproute2 and tables
with no success. If anyone can point me out to the right direction would
be hugely appreciated.
Thanks,
Juan.
---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
--
Mike Ashton
Quality Track Intl
CTO
Ph: 647-724-3500 x 301
Cell: 416-527-4995
Fax: 416-352-6043
QTI CONFIDENTIAL AND PROPRIETARY INFORMATION
The contents of this material are confidential and proprietary to Quality Track
International, Inc.
and may not be reproduced, disclosed, distributed or used without the express
permission of an authorized representative of QTI.
Use for any purpose or in any manner other than that expressly authorized is
prohibited.
If you have received this communication in error, please immediately delete it
and all copies, and promptly notify the sender.
---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
