If the paging speaker is only for the tone, then my answer does not apply. Your best bet is then to follow Andre's suggestion and have your diaplan generate a call-file that causes only the tone to be played to the paging speaker.
-- Nabeel Jafferali X2 Networks -----Original Message----- From: Elliott Jeyaseelan [mailto:[email protected]] Sent: June-18-09 4:26 PM To: Nabeel Jafferali; [email protected] Subject: RE: [on-asterisk] Paging question Can you share more on how that could help. When a call originates from a sip intercom, I would like the paging system to put out a tone, but when one of the sip phones answer that call, I want the communication only between the originating Intercom unit and the phone.....I don't want the paging system to be part of that conversation etc. The issue with the voip paging amp is that, it auto answers every incoming call there is no options to turn it off. In our case, we are not using the paging system for paging. Any ideas you could share would be great, I think Andre's suggestion seems to be closer to what I am trying to achieve. Elliott > -----Original Message----- > From: Nabeel Jafferali [mailto:[email protected]] > Sent: Thursday, June 18, 2009 2:13 PM > To: [email protected] > Subject: RE: [on-asterisk] Paging question > > You will probably have to put them all into a conference room > to do that. > > -- > Nabeel Jafferali > X2 Networks > > > -----Original Message----- > From: Elliott Jeyaseelan [mailto:[email protected]] > Sent: June-18-09 1:34 PM > To: [email protected] > Subject: [on-asterisk] Paging question > > Need to pick your brain folks, I am sure someone has tackled > this before. > > I have a cyberdata voip paging amplifier. Its registered with > Asterisk as a SIP extension. > > The voip amp automatically answers any incoming call and > plays it to the horn. > > I have a scenario where there is an Intercom call box, > someone pushes the Call button, it rings a ring-group, I want > the paging amp to play a tone and other phones in the ring > group to ring. > > When one of the phones answers, I would like the paging amp > to hang up. > > Problem is, the paging amp being factory set to auto-answer, > ends up getting the call and none of the other phones in the > ring group ever ring, obviously nature of the ring group and > the paging amp pickup the call. > > Any suggestions on how to go about implementing, I am using > Freepbx, hoping your suggestion is can be implemented on Freepbx. > > Thanks. > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [email protected] For > additional commands, e-mail: [email protected] > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [email protected] For > additional commands, e-mail: [email protected] > > > --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected] --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected]
