Synopsis: This Wednesday, Jim Van Meggelen will be giving a talk on Hot Standby & PRI circuit failover.
Using Sangoma Wanpipe and Linux Heartbeat it is now possible to build a PBX with full hot-standby—including the PRI circuit. This means that using inexpensive hardware, it is possible to bring a higher level of redundancy to the enterprise. Even though this talk will use Asterisk as an example, the reality is that any software that can use Wanpipe for it’s circuits can take advantage of this capability. When: Wednesday June 24th, 2009 7:00pm - 8:00pm Where: North York Civic Centre (in Mel Lastman Square) Committee Room 2 5100 Yonge St., North York, ON (Google map link: http://xrl.us/hqbw) The entrance into the conference area is well back from the road, just in front of the fountains. Driving: The North York Civic Centre (in Mel Lastman Square) is located on the West side of Yonge Street, just North of Yonge and Sheppard. There is plenty of (P)arking behind the building at 180 Beecroft Road, or underneath Empress Walk (entrance is off of Yonge and Emwood Ave.) TTC: The North York Civic Centre (in Mel Lastman Square) is located at the North York Centre subway stop, one stop North of Sheppard Station. Afterwards, we will progress to a nearby pub, likely Milestones. --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected]
