I forgot to mention: when both channels of the ATA are enabled, neither one is able to register. If I disable either one of the channels, the other one registers right away, so I am guessing all the settings should be OK.
Liviu ----- Original Message ----- From: "Liviu Toma" <[email protected]> To: <[email protected]> Sent: Friday, June 26, 2009 11:07 PM Subject: Making Asterisk listen on 5060 and 5061 Hello, Is there any way to make Asterisk listen on two UDP ports for SIP messages, such as 5060 and 5061 ? I am using an ATA that has 2 lines (Motorola VT2142, but it applies to other adapters as well) and I am trying to make both register with Asterisk. The problem is both channels send registration messages from the same IP and port, almost at the same time (without waiting for response for the first registration request). If I run a trace in Asterisk, I am seeing a lot of messages like "Correct auth, but based on stale nonce received from ...<peer>" so I am guessing that Asterisk isn't able to keep track of the registrations based on the account used. Needless to say, the adapter doesn't appear to have a setting to use different UDP ports for the two channels on it's side. Any idea ? Thanks, Liviu --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected]
