Hi,
Just wondering whether anyone has come across this message on a PRI
before and how they went about troubleshooting or could give some
suggestions for a solution.
We are seeing the following error message in syslog and then after a
while, Asterisk reports that the PRI is down.
Sep 30 20:35:35 pbx-firstw kernel: wanpipe1: Excessive Rx Errors ...
1619 (errs/s=8007)!
Sep 30 20:35:36 pbx-firstw kernel: wanpipe1: Excessive Rx Errors ...
1620 (errs/s=8007)!
Sep 30 20:35:37 pbx-firstw kernel: wanpipe1: Excessive Rx Errors ...
1621 (errs/s=8007)!
Sep 30 20:35:38 pbx-firstw kernel: wanpipe1: Excessive Rx Errors ...
1622 (errs/s=8007)!
Sep 30 20:35:39 pbx-firstw kernel: wanpipe1: Excessive Rx Errors ...
1623 (errs/s=8008)!
Sep 30 20:35:40 pbx-firstw kernel: wanpipe1: Excessive Rx Errors ...
1624 (errs/s=8005)!
We have had the service provider (Shaw) check and replace their equipment.
We are using a Sangoma card if it makes any difference and the same PRI
configuration at a number of different sites, without the problem.
Thanks
Martin
---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
