Looks like you are trying to dial 300 via SIP extension 50555 through the PRI:
Dial("SIP/50555-00e73ea0","DAHDI/g0|300|")
If that's the case and your PRI is connected to a telco, that is not valid.
Also what is the output of:
pri show spans
Also looks like you are using freePBX so you could try the following. Add this
under [from-internal] in extensions_custom.conf
exten => 1111,1,Dial(DAHDI/1/14087658080)
Then from a handset dial 1111
That 408 number is INtel HQ in California. I use it cause it's easy to remember
and it always answer on an IVR...
---
Andre Courchesne - Consultant
http://www.net-forces.com
MSN: courc...@net-forces.com
Skype: VoipForces
L'information contenue dans le présent document est la propriété de Andre
Courchesne. Et est divulguée en toute confidentialité. Cette information ne
doit pas être utilisée, divulguée à d'autres personnes ou reproduite sans le
consentement écrit explicite de Andre Courchesne.
The information contained in this document is confidential and property of
Andre Courchesne. It shall not be used, disclosed to others or reproduced
without the express written consent of Andre Courchesne.
On 2009-12-22, at 5:39 PM, Alex Robar wrote:
> Hi all,
>
> We're very new to PRIs, and I'm having trouble getting one working properly
> on one of our Asterisk boxes. Inbound calls through the PRI work properly,
> but outbound calls are rejected immediately. Details below (if I've missed
> something important, please let me know... Not sure what's required to
> troubleshoot this yet). Hoping someone out there might have some hints.
> Willing to hire someone to take a look if that's what it takes. Thanks in
> advance!
>
> Asterisk version: 1.4.26.2
> Hardware: Sangoma A102
> Wanpipe version: 3.5.6
> PRI coding: B8ZS
> PRI framing: ESF
> Switchtype: NI2
>
>
> CLI ouput when placing the call:
> -----------------------------------------------
> -- Executing [...@macro-dialout-trunk:26] Dial("SIP/50555-00e73ea0",
> "DAHDI/g0|300|") in new stack
> -- Requested transfer capability: 0x00 - SPEECH
> -- Called g0
> -- Channel 0/1, span 1 got hangup, cause 90
> -- Hungup 'DAHDI/1-1'
> == Everyone is busy/congested at this time (1:0/0/1)
> -- Executing [...@macro-dialout-trunk:27] Goto("SIP/50555-00e73ea0",
> "s-CHANUNAVAIL|1") in new stack
> -- Goto (macro-dialout-trunk,s-CHANUNAVAIL,1)
> -- Executing [s-chanunav...@macro-dialout-trunk:1]
> GotoIf("SIP/50555-00e73ea0", "1?noreport") in new stack
> -- Goto (macro-dialout-trunk,s-CHANUNAVAIL,3)
> -- Executing [s-chanunav...@macro-dialout-trunk:3]
> NoOp("SIP/50555-00e73ea0", "TRUNK Dial failed due to CHANUNAVAIL
> (hangupcause: 90) - failing through to other trunks") in new stack
> -----------------------------------------------
>
>
> chan_dahdi.conf:
> -----------------------------------------------
> [channels]
> context=default
> usecallerid=yes
> hidecallerid=no
> callwaiting=yes
> usecallingpres=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> canpark=yes
> cancallforward=yes
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=yes
> relaxdtmf=yes
> rxgain=0.0
> txgain=0.0
> group=1
> callgroup=1
> pickupgroup=1
> immediate=no
>
> ;Sangoma A102 port 1 [slot:4 bus:8 span:1] <wanpipe1>
> switchtype=national
> context=from-pstn
> group=0
> echocancel=yes
> signalling=pri_cpe
> channel =>1-23
> -----------------------------------------------
>
> /etc/dahdi/system.conf:
> -----------------------------------------------
> loadzone=us
> defaultzone=us
>
> #Sangoma A102 port 1 [slot:4 bus:8 span:1] <wanpipe1>
> span=1,0,0,esf,b8zs
> bchan=1-23
> echocanceller=mg2,1-23
> hardhdlc=24
> ----------------------------------------------
>
>
> --
> Alex Robar
> alex.ro...@gmail.com
---------------------------------------------------------------------
To unsubscribe, e-mail: asterisk-unsubscr...@uc.org
For additional commands, e-mail: asterisk-h...@uc.org
