Hi Jason and everyone, On Fri, Feb 12, 2010 at 01:06:26PM -0800, Jason Rose wrote: > Did you pay the $50 voip setup fee?
Yes, I did. After 2 weeks I called them and they put the configs up on my area on the fpl website. They also sent me an email notifying me that the configs were there. Thanks, > > Jason > > > > > ________________________________ > From: terry D. Cudney <[email protected]> > To: Asterisk User Group <[email protected]> > Sent: Fri, February 12, 2010 11:01:41 AM > Subject: [on-asterisk] freephoneline.ca again, and SIP response 603 > > Hi guys, > > Thanks to saurin, Bruce and Reza for the suggestions on getting > freephoneline to work... > > saurin, the codecs are g711u and g729... that doesn't seem to be the > trouble spot. > > Bruce, thanks for the suggestion re UserAgent in sip.conf. That does > change the response I get from freephoneline.ca. Setting the > useragent=freephoneline eliminates the SIP response 603. But then the audio > response on making an outbound call is that the number called is not covered > by the tariff plan.... which is ridiculous since the call was to a number > local to the freephoneline DID It DOES appear that freephoneline is > disallowing useragent=Asterisk PBX. <growl> > > Reza, thanks for the pointer to the SIP RFC. That will be very useful in > future too! > > In summary, re freephoneline.ca: My asterisk v1.4.21.2 (not one of the GUI > versions) registers successfully with voip.freephoneline.ca and > accepts/completes incoming calls. However, outgoing calls do not work so far. > With useragent=Asterisk PBX, I get the SIP response 603. With > useragent=freephoneline, on dialing a number local to the fpl DID I get the > audio message: That number is not covered by your tariff plan. > > I believe some people on this list, are using fpl successfully. Peng, I > lost your email address. The sip.conf and extensions.conf snippits that you > sent me don't work here... Is there something else you have set differently? > Or, > > If anyone is using freephoneline.ca successfully would you be willing to > share your information on how you got it working? > > Thanks again to all, > > --terry > > On Fri, Feb 12, 2010 at 03:52:03AM -0500, Reza - Asterisk Consultant wrote: > > http://www.rfc-ref.org/RFC-TEXTS/3261/chapter21.html > > > > 603 Decline > > > > The callee's machine was successfully contacted but the user > > explicitly does not wish to or cannot participate. The response MAY > > indicate a better time to call in the Retry-After header field. This > > status response is returned only if the client knows that no other > > end point will answer the request. > > > > -- > > Name: Terry D. Cudney > Phone: (705) 812-6744 > E-mail: [email protected] > SIP: [email protected] > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [email protected] > For additional commands, e-mail: [email protected] -- Name: Terry D. Cudney Phone: (705) 812-6744 E-mail: [email protected] SIP: [email protected] --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected]
