do you have a firewall port pointing back to your asterisk server for
your iax2 port? or is blanket set as the dmz? have you ran a traffic
dump yet to see if the client is passing packets to the router? (could
be router is not allowing iax2 back in)
Henry Coleman wrote:
I'll give it a try....
IAX Softphone Ext.203 ----------------------->
-------------->IP 192.168.2.238------>Router---------->IP
192.168.2.254 Asterisk Server
SIP Softphone Ext 204 ----------------------->
|
|
WAN my.dyndns.domain
<------------------------------------------------------------------------
|
Both phones point to my.dyndns.domain for the server but only SIP
works. IAX works only if I use the internal LAN IP address
(192.168.2.238)
On Mon, Apr 12, 2010 at 9:43 AM, Philip Mullis <[email protected]
<mailto:[email protected]>> wrote:
Hey Henry, can you pop us an ascii picture of your network and
example of your profile your using..
Have you done a query on the inside lan to see if the returned
address of the fqdn is that of your asterisk server?
Henry Coleman wrote:
Hi all, I am going on vacation in a couple of weeks and so I
have set up a
Zoiper softphone on my Laptop so I can
make international calls to Canada via my Asterisk box.
Actually since I downloaded the Zoiper I set up both an IAX
and SIP
softphone using two different extensions 203/204
I noticed that while the SIP phone works with my external
domain name (on
the same LAN) my IAX connection will only works if I
use my local server's IPaddress. i.e. doesn't recognize the
domain name. I'm
sure that if I use the IAX connection outside of the LAN
using the domain name it will work but why doesn't it work
from the LAN
side?
Henry
--
Henry Coleman
---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
