Hi Everyone,
I know this is way off-topic of the list but it does involve getting Asterisk
service up and running :-)
In nutshell:
I need to SIP/UDP traffic of eth1 (dhcpd server) traffic to tun0 (openvpn
tunnel) without sending the dhcpd requests to tun0.
In detail:
I have two servers:
Server A running Asterisk and OpenVPN Server.
Server B running DHCPd and has two NIC cards. Eth0 is the WAN to ISP. Eth1 is
the NIC that feeds the Switch with DHCPd IPs to endpoint SIP phones.
Server A and Server B are miles and miles away from each and are connected to
the internet either via Eht0 or Vnet.
OpenVPN on Server A is set to IP range 172.15.0.0/24 so Server A and B can ping
each other in that range with 172.15.0.1 assigned to Server A.
Server B is connected to Server A as an OpenVPN client. I can ping Server A
from Server B when doing: ping 172.15.0.1
However, any endpoints (SIP phones) that have obtained IP from Server B DHCPd
can not ping 172.15.0.1. Network 172.15.0.1 is simple unreachable to them. My
thought was that upon succesful establish of the openvpn connection the routes
will populate properly but it seems that any requests to 172.15.0.1 hit eth0
which is of course wrong. I tried adding routes and I got SIODDART
Here is what I need to accomplish:
Run a DHCPd service on Server B (which has two NIC cards) and feed IPs to SIP
phones and endpoint
Create a tunnel between
Note: I can't do: push "redirect-gateway def1" because it will make Server B
unreachable and Enpoint A points to Server A for DHCP packets which is wrong.
Thanks,
