I have two of these setup to two different Asterisk servers (PiaF). Both of them are showing similar behaviour and I'm wondering if anyone can help or give me their settings for these units.
Specifically, I have each SPA2102 using both available SIP lines. Both of these units are behind different networks (different internet connections, but both Rogers) at different locations, both behind DD-WRT with no firewall rules. Both are hooked up to different asterisk boxes. The first line is an extension pointing to an asterisk box. The Second line is hooked up directly to a SIP account at a service provider. In one case, the first line: outbound calls work without issue. Inbound calls to that extension do not ring through on a frequent basis. Second line directly to Sip provider: No problems at all in/out In the second case, it's hit/miss... inbound/outbound don't work sometimes. They may get a call into the extension, which follows them on a cell, but it never rings the extension. Then trying to make a test call via that extension fails. Then, sometimes it works. Does anyone have any suggestions on how to setup the SPA2102 (or settings they can share), and if any specific rules need to be setup on the DD-WRT side? I'm not sure where to start since every time I look at it, it's working. Regards, Chuck Mariotti [Description: Description: Description: Xunity_Ad] 13 Seymour Ave. Toronto, Ontario M4J 3T3 Office: 416-469-5008 x 222 Fax: 416-469-5009 [email protected]<mailto:[email protected]> www.xunity.com<http://www.xunity.com/>
