/*Hello Dean:*/
The reason for this is that with **MOST** 3G/4G services providers
including Rogers, Telus, Bell, Fido and others... if you connect
it to a laptop - you will observe there are two IPs.
1.) IP A -- is the IP that your Laptop receives.
This IP A -- you can see in your ifconfig or IPCONFIG output.
2) IP B -- is the internet class IP address that you are not aware of.
This IP B -- you can see when you go to a website like www.IPCHICKEN.com.
You are behind a double NAT. Don't ask me why! That's just what we
found out when we were developing the MoFi-Router and did testing with
**ALL** carriers in Canada.
On that note -- we have released Version 2 of the router. We can
upgrade your router to Version 2 free of charge, and have already tested
LTE (Rogers & Bell & American carriers). Our router is the *ONLY*
router in the market today that supports LTE devices (plug and play).
In order to upgrade your router you would need you to bring the router
to our store. Its not only a software upgrade but also a hardware upgrade.
By the way... if you really want to play with the router - you can SSH
into it. Its 100% Linux.
/*
Cheers!
Reza.*/
--
*
*FOUNDER & SR. TELECOM ANALYST*
/VOIPERNETICS COMMUNICATIONS <http://www.voipernetics.com/>/*
NATION WIDE DIDS, SIP TRUNKS & VOIP 911.
PARTIAL / FULL VIRTUAL PRI - NO CONTRACTS!
HOSTED PBX & TERMINATION SERVICES.
TEL: 647-476-2067
Dean Yorke wrote the following on 10/13/2011 1:24 PM:
Hi All,
I got one of those mofi routers so that I can connect my wind mobile stick and
then put this on a network and provide remote support.
Problem is, I can't access the router or anything behind it.
It seems that there is an issue with multiple IP's from the provider with
regards to the gateway.
Anyone get one of these working like this? No other connection to the
internet. just the wind mobile sitck.
Thanks
---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
