Olá Paulo; Dê uma olhada nessa passagem contida no voip-info sobre o seu problema:
==================================== Next step: Run ztcfg Then run /sbin/ztcfg -vvvv If it exits silently, your configuration is correct. If you get a message like: ZT_CHANCONFIG failed on channel 1: Invalid argument (22) Did you forget that FXS interfaces are configured with FXO signalling and that FXO interfaces use FXS signalling? then your configuration is incorrect. It may also be helpful to check your /var/log/messages logfile to see what messages the zaptel, wcfxs and/or wcfxo kernel modules generated when they were loaded. ==================================== Aparentemente os módulos necessários não estão carregados. Abraços; Leo On 9/14/07, paulo leonardo <[EMAIL PROTECTED]> wrote: > # cat /etc/zaptel.conf > fxsks=1 > loadzone=us > defaultzone=us > > # ztcfg -vvv > > channel map: > > Channel 01: FXS Kewlstart (Default) (Slaves :01) > > 1 channels configured. > > Changing signalling on channel 1 from Clear channel to FXS kewlstart > ZT_CHANCONFIG failed on channel 1: Invalid argument (22) > Did you forget that FXS interfaces are configured with FXO signalling > and that FXO interfaces use FXS signalling? > > Alguem sabe me dizer oq ta ocorrendo? > > > _______________________________________________ > Compre uma camiseta da AsteriskBrasil.org! > http://www.voipmania.com.br > == VoIPMania.com.br == > > _______________________________________________ > LIsta de discussões AsteriskBrasil.org > [email protected] > http://listas.asteriskbrasil.org/mailman/listinfo/asteriskbrasil > _______________________________________________ Compre uma camiseta da AsteriskBrasil.org! http://www.voipmania.com.br == VoIPMania.com.br == _______________________________________________ LIsta de discussões AsteriskBrasil.org [email protected] http://listas.asteriskbrasil.org/mailman/listinfo/asteriskbrasil
