Olá Amigos! Fiz o download do Asterisk + libopenr2, conforme http://libopenr2.org/:
svn checkout http://svn.digium.com/svn/asterisk/team/moy/mfcr2-1.4 Já estava com libpri e zaptel instalado, e depois do download, make clean ; ./configure ; make ; make install ; make samples - e instalou tudo direitinho. Porém, quando vou iniciar o asterisk, não carrega o módulo chan_zap. Vejam: *CLI> module load chan_zap.so [Sep 30 11:54:49] WARNING[5135]: pbx.c:2981 ast_register_application: Already have an application 'ZapSendKeypadFacility' == Parsing '/etc/asterisk/zapata.conf': Found [Sep 30 11:54:49] ERROR[5135]: chan_zap.c:12044 process_zap: Unknown signalling method 'mfcr2' [Sep 30 11:54:49] ERROR[5135]: chan_zap.c:11610 build_channels: Signalling must be specified before any channels are. A priori, a configuração do E1 está ok, quando eu uso zttool, não mostra nenhum alarme, só mostra ok. Vejam os arquivos de configuração: [EMAIL PROTECTED]:/etc/asterisk# cat zapata.conf [channels] usecallerid=yes callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echotrainning=yes echocancelwhenbridged=yes signalling=mfcr2 mfcr2_variant=br mfcr2_get_ani_first=no mfcr2_max_ani=20 mfcr2_max_dnis=4 mfcr2_category=national_subscriber mfcr2_logdir=span1 mfcr2_logging=all group=1 callgroup=1 pickupgroup=1 callerid=asreceived context=from-pstn channel => 1-15,17-31 [EMAIL PROTECTED]:/etc/asterisk# cat /etc/zaptel.conf # Autogenerated by /usr/sbin/genzaptelconf -- do not hand edit # Zaptel Configuration File # # This file is parsed by the Zaptel Configurator, ztcfg # # It must be in the module loading order ## Span 1: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" (MASTER) HDB3/CCS/CRC4 RECOVERINGClockSource #span=1,1,0,ccs,hdb3,crc4 ## termtype: te #bchan=1-15,17-31 #dchan=16 # ## Span 2: TE4/0/2 "T4XXP (PCI) Card 0 Span 2" HDB3/CCS/CRC4 RED #span=2,2,0,ccs,hdb3,crc4 ## termtype: te #bchan=32-46,48-62 #dchan=47 # ## Span 3: TE4/0/3 "T4XXP (PCI) Card 0 Span 3" HDB3/CCS/CRC4 RED #span=3,3,0,ccs,hdb3,crc4 ## termtype: te #bchan=63-77,79-93 #dchan=78 # ## Span 4: TE4/0/4 "T4XXP (PCI) Card 0 Span 4" HDB3/CCS/CRC4 RED #span=4,4,0,ccs,hdb3,crc4 ## termtype: te #bchan=94-108,110-124 #dchan=109 # ## Global data # #loadzone = us #defaultzone = us span=1,1,0,cas,hdb3 cas=1-15:1101 cas=17-31:1101 dchan=16 loadzone=br defaultzone=br O que pode estar acontecendo para não carregar o módulo zaptel, com esse erro, Unknown signalling method 'mfcr2'? Valeu! João Carlos.
_______________________________________________ Compre uma camiseta da AsteriskBrasil.org! http://www.voipmania.com.br Acesse o canal IRC de discussão sobre Asterisk em Português Brasileiro na rede Freenode.net: #asterisk-br _______________________________________________ Lista de discussões AsteriskBrasil.org AsteriskBrasil@listas.asteriskbrasil.org http://listas.asteriskbrasil.org/mailman/listinfo/asteriskbrasil