Sorry for late reaction on this one... You went further than me since i can not place any call in NT mode :-( i get link down most of the time...
I know that I did not contribute financially to your project which give me no right to ask anything but if you could release astlinux with 0.2.1 misdn it would be terrific, according to Beronet , this solves a lot of bugs, It's not the first time that I read that cards wish to share irq with other card, this was mainly reported by Dell users, do you use dell machines ?? I have multiple pc's where I could test , I hope you will release a newer version soon, I really would like to use astlinux in production and obviously contribute, Kind regards and "bon courage, we say in French" Jean-Louis -----Message d'origine----- De : [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] De la part de Juergen K. Zick Envoyé : vendredi 27 janvier 2006 22:20 À : Discussion of AstLinux - Asterisk on Compact Flash Objet : Re: [Astlinux-users] ISDN experiences Beronet cards 1S0 4T0's AVM fritz PCI need for newer misdn version Perfect feedback ... I still have not solved my problem with the HFC-S cards in NT and TE mode .. They run for one call and then the channel via mISDN crashes ;-) ... And I have still the problem that the HFC-S cards on my system ALWAYS want to share an IRQ with another card, e.g. the USB-addapter :-( ... Any ideas ??? --Juergen >I d like to share my experiences with ISDN cards > >AVM fritz card TE mode, astlinux 3.0 Chan_mISDN 0.2.0 I loaded 2 cards >without any problems and was able to places and receive calls without >crash need longer testing now > >Beronet Card 4t0's TE mode on the 4 ports astlinux 3.0 Chan_mISDN 0.2.0 >I loaded the card without any problems and was able to places and >receive calls without crash need longer testing now > >Beronet 1S0 card TE mode, astlinux 3.0 Chan_mISDN 0.2.0 Successful also > >Beronet 1S0 card NT mode, astlinux 3.0 Chan_mISDN 0.2.0 behind a PBX >alcatel( what i really need ..) >L1 down, L2 down, sometimes when a place a call from SIP to Misdn , L1 >comes up but call is not terminated into the PABX > >According to Beronet support, we should upgrade to 0.2.1 which is much >more stable and try again.... > >Any plans to update chan_Misdn ?????? ( I hope so ) > >Thanks >jl > >_______________________________________________ >Astlinux-users mailing list >[email protected] >http://lists.kriscompanies.com/mailman/listinfo/astlinux-users > >Donations to support AstLinux are graciously accepted via PayPal to >[EMAIL PROTECTED] _______________________________________________ Astlinux-users mailing list [email protected] http://lists.kriscompanies.com/mailman/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED] -- _______________________________________________ Astlinux-users mailing list [email protected] http://lists.kriscompanies.com/mailman/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED]
