> Are you running X-Windows with KDE/Gnome on Debian/CentOS? > > Dmitry Lebedev >
Absolutely not! I am running FreePBX 2.1.1 though. I only run what is required for that. > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of canuck15 > Sent: Thursday, June 29, 2006 10:57 AM > To: [EMAIL PROTECTED] > Subject: [Astlinux-users] Asterisk Native Sounds > > > Hi there, > > I have experimented with Astlinux 0.40 and was quite > impressed with how responsive it was and how good the voice > prompts sounded. I figured I would install Asterisk Native > Sounds on a standard Asterisk 1.2.9.1 setup but the sound > wasn't nearly as good. Both setups are using the exact same > hardware, phones, ulaw SIP and ulaw native sounds etc. I > tried installing Asterisk on Debian Sarge and CentOS4.3 with > the same problems. > > The sound crackles, pops, and momentarily drops out. You can > tell the quality of sound is better but the artifacts added > are quite noticeable and the overall impression is that it > does not sound as good. > > Any ideas why ulaw native sounds work on Astlinux 0.40 but > not Asterisk > 1.2.9.1 (haven't tried other versions)? > _______________________________________________ > Astlinux-users mailing list > [email protected] > http://lists.kriscompanies.com/mailman/listinfo/astlinux-users _______________________________________________ Astlinux-users mailing list [email protected] http://lists.kriscompanies.com/mailman/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED]
