Lonnie et al, Here at KC2ENI I used it for experimentation reasons. I thought it proper that I should have experience in both platforms.
For "production" however I think I'd use NET4801. I'd also incorporate the WiFi node into the m0n0wall box using a Prism card. I've never yet sold both platforms to the same customer so I guess I'll have to wait a while for that. Mark On Sat, 2006-08-12 at 09:37 -0500, Lonnie Abelbeck wrote: > On Aug 12, 2006, at 5:49 AM, Mark Phillips wrote: > > > Excellent choice with both m0n0wall and AstLinux... > > > > Setup here is a 3 port WRAP for the m0n0wall with one port > > connected to > > the WAN, one to the LAN and one to the WiFi. The WiFi is a WRT54G V6 > > running DD-WRT and the Astlinux is running in a NET4801. > > Mark, > > I am curious, do you use the WRAP board for m0n0wall instead of a > net4801 for strictly cost reasons? > > I can see an advantage of standardizing on the net4801 for both > m0n0wall and Astlinux. > > Thanks for your help. > > Lonnie > _______________________________________________ Astlinux-users mailing list [email protected] http://lists.kriscompanies.com/mailman/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED]
