Did this to mine this morning (I have the 400xm) and all is kinda sorta OK.
The OS/software is running but it's not bringing up my NETCF card. Ideas? Mark On Thu, 2006-08-24 at 22:04 -0400, Kristian Kielhofner wrote: > listas iPfone wrote: > > Hi! > > > > I have a brand new Gumstix here to install astlinux....maybe somebody can > > explain the procedure to install? or provide some link? > > > > Thanks > > > > Miklos > > > > > Miklos, > > The default config works perfectly for a 400xm. If you have a 200xm, > you will need to run make menuconfig and (de)select: > > AstLinux Target Device -> Gumstix -> Basix-Connex -> 400mhz > > That will configure AstLinux for your 200mhz cpu. > > If you don't have an "xm" model, you will need to drastically reduce > the number of package targets - they have 4mb of flash as opposed to the > xm, which has 16mb. > > Grab yourself a copy of trunk: > > svn co https://svn.sourceforge.net/svnroot/astlinux/trunk astlinux-trunk > > cp gumstix.config .config > make oldconfig > make menuconfig (make your changes) > make > make jffs2root > > You will need to flash the gumstix using these instructions: > > http://docwiki.gumstix.org/Replacing_the_filesystem_image > > I flash my 'stix using TFTP and upgrade u-boot over serial. > > Let me know if you have any problems. > > -- > Kristian Kielhofner > _______________________________________________ > Astlinux-users mailing list > [email protected] > http://lists.kriscompanies.com/mailman/listinfo/astlinux-users > > Donations to support AstLinux are graciously accepted via PayPal to [EMAIL > PROTECTED] _______________________________________________ Astlinux-users mailing list [email protected] http://lists.kriscompanies.com/mailman/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED]
