On 01 de out de 2006, at 13:27, Kristian Kielhofner wrote: > Without a stuart, you will have to modify /etc/rc.modules in > "build_*/etc/rc.modules" before you create the jffs2 file system. > Uncomment the smc modules and create your root file system. When the > netstix 200xm boots up, it will attempt to get an IP address via > DHCP on > the ethernet port. You should be able to look on your DHCP server to > see what it was assigned.
The DHCP client is compiled by default? > You should be able to SSH into that IP address with the default > username "root" and password "astlinux". Ok. How may mount an external CF? I still cant do it... I uncommented the MMC modules and commented de pcmcia, but cannot mount the CF (mount /dev/hda1 /mnt/whatever) Is this right? The CF is recognized as an IDE device? > As far as I know, the gumstix/netstix is unable to boot from the CF. > In AstLinux you might be able to use the kexec function to boot a > kernel > from flash, and then load another kernel from CF. However, I don't > think that the default Gumstix kernel supports kexec. The AstLinux > one > does :). Don't know either... > Later today I will add a "make menuconfig" target for the netstix. > That should make things easier! That will be great. Im excited to work with my new toy. Thanks Kris. Denis. _______________________________________________ Astlinux-users mailing list [email protected] http://lists.kriscompanies.com/mailman/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED]
