Re: [Astlinux-users] registrating a E70 nokia on astlinux/asterisk

Tue, 07 Nov 2006 09:12:16 -0800

There is nokia e70-2 which supportws 850MHz instead of 900MHz (North American version).
It's still hard to get, but you can probably find it on ebay. I am looking for one as well :)

Wojtek

On 7-Nov-06, at 12:34 PM, Kristian Kielhofner wrote:

Steven Leeman wrote:
I'm trying to get my Nokia E70 registrated on the lastest Astlinux 
device... but it never get's authorized:

an Sjphone starts also thesame way... but it registrates a second time 
but adding "Digest" information to it's request...and then...it get's 
authorized?

I don't think i can send "Digest" information with my E70... is there 
some setting in sip.conf I have to turn on/off to allow registration 
without a "digest"?
I've taken settings from some forums that said these should work on an 
asterisk server...and I've never had troubles registrating with any 
softphone/pda phone uptill now... The E70 can successfully 
connect/use/register with sip.voipbuster.com <http://sip.voipbuster.com> 
and pbxes.org <http://pbxes.org>

settings e70
profile : astlinux
service profile : IETF
wifi access point : home
public username: sip:[EMAIL PROTECTED] 
use compression: no
registration : always
use security (tls?) : no
proxy server
   adres : sip:somewhere.someplace.org <http://somewhere.someplace.org>
   security domain : <none>
   username: 325
   password : *****
   allow free routing : yes
   type : udp
   port : 5060
Registrar:
  adres : sip:somewhere.someplace.org <http://somewhere.someplace.org>
  security domain : <none>
  username: 325
  password :****
  type : udp
   port : 5060

I've got an astlinux running with following settings in sip.conf

[general]
context=default            ; Default context for incoming calls
bindport=5060            ; UDP Port to bind to (SIP standard port is 5060)
bindaddr=0.0.0.0 <http://0.0.0.0>        ; IP address to bind to 
(0.0.0.0 <http://0.0.0.0> binds to all)
srvlookup=yes            ; Enable DNS SRV lookups on outbound calls
domain=192.168.2.80 <http://192.168.2.80>            ; Add IP address as 
local domain
sipdebug = yes            ; Turn on SIP debugging by default, from

[325]
type=friend
context=default
regcontext=default
regexten=325
callerid=("Steven Leeman" <325>)
secret=*********
insecure=very
canreinvite=yes
host=dynamic
dtmfmode=RFC2833
qualify=yes
nat=yes
pickupgroup=1
callgroup=1
;[EMAIL PROTECTED]
disallow=all
allow=ulaw
allow=alaw
allow=gsm



..snip..

First of all, Nokia E70.  Very cool.  I want to get one, but I am 
worried that because it is only tri-band GSM (900/1800/1900) and not 
quad band (850/900/1800/1900), it won't work well for me in the US.

I might have to settle for an E61 instead :).

Anyways, I have heard that there are some issues with the e70 and 
Asterisk/SIP in general.  I don't know the specifics, but it looks to me 
that in the above dialog (as you presumed), the e70 should try to 
register again after it receives the 401 unauthorized, and reply with 
another REGISTER, this time adding the "Authorization: XXX" header, just 
like SJPhone (and every other SIP client I have ever seen).

I know that these Nokia's are running Symbian OS 9.1, and that there 
are constant firmware updates for them.  I also know that there are a 
LOT of people that are very interested in getting them to work, for 
obvious reasons.

I'm soooo jealous, I love the E70!

--
Kristian Kielhofner
_______________________________________________
Astlinux-users mailing list

Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED].



--- Wojtek


 

_______________________________________________
Astlinux-users mailing list
[email protected]
http://lists.kriscompanies.com/mailman/listinfo/astlinux-users

Donations to support AstLinux are graciously accepted via PayPal to [EMAIL 
PROTECTED]

Reply via email to