Philip Prindeville wrote: > I finally received (and installed) my Sangoma S518 card, and installed > it... But it doesn't seem to be auto-configuring. > > # dmesg > ... > geode-aes: GEODE AES engine enabled. > AMD Geode RNG detected > scsi 0:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 > CCS > SCSI device sda: 2015232 512-byte hdwr sectors (1032 MB) > sda: Write Protect is off > sda: Mode Sense: 23 00 00 00 > sda: assuming drive cache: write through > SCSI device sda: 2015232 512-byte hdwr sectors (1032 MB) > sda: Write Protect is off > sda: Mode Sense: 23 00 00 00 > sda: assuming drive cache: write through > sda: sda1 > sd 0:0:0:0: Attached scsi removable disk sda > usb-storage: device scan complete > eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 > pc87360: Device 0x09 not activated > pc87360 9191-6620: VLM conversion set to 1s period, 160us delay > # lsmod > Module Size Used by > binfmt_misc 10440 1 > pc87360 18288 0 > hwmon_vid 2464 1 pc87360 > hwmon 3060 1 pc87360 > i2c_isa 4928 1 pc87360 > i2c_core 20464 2 pc87360,i2c_isa > geode_rng 2144 0 > geode_aes 5636 0 > blkcipher 5408 1 geode_aes > via_rhine 22184 0 > mii 5024 1 via_rhine > rtc 12336 0 > cs5535_gpio 4596 0 > # lspci > 00:01.0 Host bridge: Advanced Micro Devices [AMD] CS5536 [Geode companion] > Host Bridge (rev 30) > 00:01.2 Entertainment encryption device: Advanced Micro Devices [AMD] Geode > LX AES Security Block > 00:06.0 Ethernet controller: VIA Technologies, Inc. VT6105M [Rhine-III] (rev > 96) > 00:07.0 Ethernet controller: VIA Technologies, Inc. VT6105M [Rhine-III] (rev > 96) > 00:08.0 Ethernet controller: VIA Technologies, Inc. VT6105M [Rhine-III] (rev > 96) > 00:09.0 Ethernet controller: VIA Technologies, Inc. VT6105M [Rhine-III] (rev > 96) > 00:0e.0 Network controller: Globespan Semiconductor Inc. Pulsar [PCI ADSL > Card] (rev 01) > 00:14.0 ISA bridge: Advanced Micro Devices [AMD] CS5536 [Geode companion] ISA > (rev 03) > 00:14.2 IDE interface: Advanced Micro Devices [AMD] CS5536 [Geode companion] > IDE (rev 01) > 00:14.4 USB Controller: Advanced Micro Devices [AMD] CS5536 [Geode companion] > OHC (rev 02) > 00:14.5 USB Controller: Advanced Micro Devices [AMD] CS5536 [Geode companion] > EHC (rev 02) > > > What am I missing? > > -Philip > >
Forgot to ask: the .conf file on the key disk: I looked in it, and saw the T1/HDLC stuff, but couldn't find anything to enable ADSL specifically. Where is this stuff? Is it in a different file? -Philip ------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________ Astlinux-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED]
