Darrick,

this is the first time i see this behavior but i take good note.

Thank you :)

Jonathan GF


On Nov 20, 2007 3:45 PM, Darrick Hartman (lists) <[EMAIL PROTECTED]>
wrote:

> Jonathan GF-
>
> The makefile is NOT wrong.  You need to do a make oldconfig then a make
> menuconfig as some of the variables have changed.  If you don't do that,
> the variable doesn't get set.
>
> Darrick
>
> Jonathan GF wrote:
> > Hi,
> >
> > the makefile is wrong. Something with the variable substitution of
> > RHINO_VER (ftp://ftp.rhinoequipment.com/Drivers/rhino-.tbz2 should be
> > ftp://ftp.rhinoequipment.com/Drivers/rhino-2.2.1.tbz2 or something
> > similar according to the mk).
> >
> > The exit is the next:
> >
> >
> -------------------------------------------------------------------------------------------------------------------------------------------------------------
> >
> > make[1]: Leaving directory
> > `/home/jgf/astlinux-trunk/build_i586/busybox-1.4.1-initrd'
> > rm /home/jgf/astlinux-trunk/build_i586/initrd/linuxrc
> > cp -a target/initrd/target_skeleton/linuxrc
> > /home/jgf/astlinux-trunk/build_i586/initrd/linuxrc
> > toolchain/getter_script.sh -P /home/jgf/astlinux-trunk/dl
> > ftp://ftp.rhinoequipment.com/Drivers/rhino-.tbz2
> > --21:54:27--  ftp://ftp.rhinoequipment.com/Drivers/rhino-.tbz2
> >            => `/home/jgf/astlinux-trunk/dl/rhino-.tbz2'
> > Resolving ftp.rhinoequipment.com... 74.54.1.27 <http://74.54.1.27>
> > Connecting to ftp.rhinoequipment.com|74.54.1.27|:21.. . connected.
> > Logging in as anonymous ... Logged in!
> > ==> SYST ... done.    ==> PWD ... done.
> > ==> TYPE I ... done.  ==> CWD /Drivers ... done.
> > ==> PASV ... done.    ==> RETR rhino-.tbz2 ...
> > No such file `rhino-.tbz2'.
> >
> > Retrying from astlinux alternate site...
> > --21:54:30--  http://files.astlinux.org/rhino-.tbz2
> >            => `/home/jgf/astlinux-trunk/dl/rhino-.tbz2'
> > Resolving files.astlinux.org... 208.109.78.142 <http://208.109.78.142>
> > Connecting to files.astlinux.org|208.109.78.142|:80... connected.
> > HTTP request sent, awaiting response... 404 Not Found
> > 21:54:31 ERROR 404: Not Found.
> >
> > --21:54:31--  http://files.astlinux.org/rhino-.tbz2.sha1
> >            => `dl/rhino-.tbz2.sha1'
> > Resolving files.astlinux.org... 208.109.78.142 <http://208.109.78.142>
> > Connecting to files.astlinux.org|208.109.78.142|:80... connected.
> > HTTP request sent, awaiting response... 404 Not Found
> > 21:54:32 ERROR 404: Not Found.
> >
> > sha1sum: dl/rhino-.tbz2.sha1: No such file or directory
> > rhino-.tbz2 failed verification - exiting
> > make: *** [/home/jgf/astlinux-trunk/dl/rhino-.tbz2] Error 1
> >
> > real    0m32.335s
> > user    0m5.804s
> > sys     0m7.976s
> >
> >
> >
> >
> >
> >
> > On Nov 19, 2007 9:30 PM, <[EMAIL PROTECTED]
> > <mailto:[EMAIL PROTECTED]>> wrote:
> >
> >     Revision: 1385
> >
> >      http://astlinux.svn.sourceforge.net/astlinux/?rev=1385&view=rev
> >     <http://astlinux.svn.sourceforge.net/astlinux/?rev=1385&view=rev>
> >     Author:   dhartman
> >     Date:     2007-11-19 12:30:06 -0800 (Mon, 19 Nov 2007)
> >
> >     Log Message:
> >     -----------
> >     rhino package update--we need to look at this closer, but it works
> >
> >     Modified Paths:
> >     --------------
> >        trunk/package/rhino/Config.in
> >        trunk/package/rhino/rhino.mk
> >
> >     Modified: trunk/package/rhino/Config.in
> >     ===================================================================
> >     --- trunk/package/rhino/Config.in       2007-11-19 19:23:53 UTC (rev
> >     1384)
> >     +++ trunk/package/rhino/Config.in       2007-11-19 20:30:06 UTC (rev
> >     1385)
> >     @@ -1,9 +1,28 @@
> >      config BR2_PACKAGE_RHINO
> >            bool "rhino"
> >     -       default n
> >     +       default y
> >            select BR2_PACKAGE_ZAPTEL
> >            help
> >                    Rhino - Support for Rhino analog and digital PCI
> cards
> >     -
> >     +               Be sure to select the correct version! See the
> >     specific help
> >     +               for each to know which is the correct version for
> >     your hardware.
> >                     http://www.rhinoequipment.com
> >     +choice
> >     +       prompt "Driver Version"
> >     +       depends BR2_PACKAGE_RHINO
> >     +       default BR2_PACKAGE_RHINO_v2
> >     +       help
> >     +               Select which version series to compile and install.
> >
> >     +       config BR2_PACKAGE_RHINO_v1
> >     +               bool "Rhino Drivers 1.1.1"
> >     +               help
> >     +                       Select this if you have a Rhino digital card
> >     without EC or that
> >     +                       is not running firmware 36 or above.
> >     +       config BR2_PACKAGE_RHINO_v2
> >     +               bool "Rhino Drivers 2.2.1"
> >     +               help
> >     +                       Select this if you are running a recently
> >     purchased Rhino card,
> >     +                       or one you have upgraded to version 36 or
> >     above. This applies
> >     +                       specifically to digital cards with EC.
> >     +endchoice
> >
> >     Modified: trunk/package/rhino/rhino.mk
> >     ===================================================================
> >     --- trunk/package/rhino/rhino.mk        2007-11-19 19:23:53 UTC (rev
> >     1384)
> >     +++ trunk/package/rhino/rhino.mk        2007-11-19 20:30:06 UTC (rev
> >     1385)
> >     @@ -3,16 +3,26 @@
> >      # rhino - Package for Rhino PCI drivers.
> >      #
> >      #############################################################
> >     +ifeq ($(strip $(BR2_PACKAGE_RHINO_v1)),y)
> >      RHINO_VER := 1.1.1
> >     +endif
> >     +ifeq ($(strip $(BR2_PACKAGE_RHINO_v2)),y)
> >     +RHINO_VER := 2.2.1
> >     +endif
> >      RHINO_SOURCE := rhino-$(RHINO_VER).tbz2
> >      RHINO_SITE := ftp://ftp.rhinoequipment.com/Drivers
> >      RHINO_DIR := $(BUILD_DIR)/rhino-$(RHINO_VER)
> >      RHINO_CAT := bzcat
> >      RHINO_TARGET_BINARY := lib/modules/$(LINUX_VERSION)/misc/r1t1.ko
> >     -RHINO_MODULES := r1t1 r4fxo rxt1 rcbfx
> >     +RHINO_MODULES := r1t1 rxt1 rcbfx
> >     +ifeq ($(strip $(BR2_PACKAGE_RHINO_v1)),y)
> >     +RHINO_MODULES += r4fxo
> >     +RHINO_LEGACY_MODULES :=
> >     +endif
> >     +ifeq ($(strip $(BR2_PACKAGE_RHINO_v2)),y)
> >     +RHINO_LEGACY_MODULES := r4fxo
> >     +endif
> >
> >     -#LINUX_VER=$(LINUX_VERSION)
> >     -
> >      $(DL_DIR)/$(RHINO_SOURCE):
> >            $(WGET) -P $(DL_DIR) $(RHINO_SITE)/$(RHINO_SOURCE)
> >
> >     @@ -28,16 +38,16 @@
> >      $(RHINO_DIR)/.built: $(RHINO_DIR)/.configured
> >            $(MAKE1) KVER=$(LINUX_VERSION)
> >     KINSTDIR=lib/modules/$(LINUX_VERSION)/kernel ZAPDIR=$(ZAPTEL_DIR) \
> >            PWD=$(RHINO_DIR) $(TARGET_CONFIGURE_OPTS)
> >     INSTALL_PREFIX=$(TARGET_DIR) KSRC=$(BUILD_DIR)/linux \
> >     -       MODULES="$(RHINO_MODULES)"
> >     KMOD=$(TARGET_DIR)/lib/modules/$(LINUX_VERSION)
> >     ARCH=$(ZAPTEL_TARGET_ARCH) \
> >     -       KINCLUDES=$(STAGING_DIR)/include \
> >     +       LEGACY_MODULES="$(RHINO_LEGACY_MODULES)"
> >     MODULES="$(RHINO_MODULES)" \
> >     +       KMOD=$(TARGET_DIR)/lib/modules/$(LINUX_VERSION)
> >     ARCH=$(ZAPTEL_TARGET_ARCH) KINCLUDES=$(STAGING_DIR)/include \
> >            -C $(RHINO_DIR) all
> >            touch $(RHINO_DIR)/.built
> >
> >      $(TARGET_DIR)/$(RHINO_TARGET_BINARY): $(RHINO_DIR)/.built
> >            $(MAKE1) KVER=$(LINUX_VERSION)
> >     KINSTDIR=lib/modules/$(LINUX_VERSION)/kernel ZAPDIR=$(ZAPTEL_DIR) \
> >            PWD=$(RHINO_DIR) $(TARGET_CONFIGURE_OPTS)
> >     INSTALL_PREFIX=$(TARGET_DIR) KSRC=$(BUILD_DIR)/linux \
> >     -       MODULES="$(RHINO_MODULES)"
> >     KMOD=$(TARGET_DIR)/lib/modules/$(LINUX_VERSION)
> >     ARCH=$(ZAPTEL_TARGET_ARCH) \
> >     -       KINCLUDES=$(STAGING_DIR)/include \
> >     +       LEGACY_MODULES="$(RHINO_LEGACY_MODULES)"
> >     MODULES="$(RHINO_MODULES)" \
> >     +       KMOD=$(TARGET_DIR)/lib/modules/$(LINUX_VERSION)
> >     ARCH=$(ZAPTEL_TARGET_ARCH) KINCLUDES=$(STAGING_DIR)/include \
> >            -C $(RHINO_DIR) install
> >            $(DEPMOD) -ae -F $(LINUX_DIR)/System.map -b $(TARGET_DIR) -r
> >     $(LINUX_VERSION)
> >
> >
> >
> >     This was sent by the SourceForge.net collaborative development
> >     platform, the world's largest Open Source development site.
> >
> >
> -------------------------------------------------------------------------
> >
> >     This SF.net email is sponsored by: Microsoft
> >     Defy all challenges. Microsoft(R) Visual Studio 2005.
> >     http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> >     <http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/>
> >     _______________________________________________
> >     Astlinux-commits mailing list
> >     [EMAIL PROTECTED]
> >     <mailto:[EMAIL PROTECTED]>
> >     https://lists.sourceforge.net/lists/listinfo/astlinux-commits
> >
> >     Donations to support AstLinux are graciously accepted via PayPal to
> >     [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>.
> >
> >
> >
> > ------------------------------------------------------------------------
> >
> >
> -------------------------------------------------------------------------
> > This SF.net email is sponsored by: Microsoft
> > Defy all challenges. Microsoft(R) Visual Studio 2005.
> > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> >
> >
> > ------------------------------------------------------------------------
> >
> > _______________________________________________
> > Astlinux-users mailing list
> > [email protected]
> > https://lists.sourceforge.net/lists/listinfo/astlinux-users
> >
> > Donations to support AstLinux are graciously accepted via PayPal to
> [EMAIL PROTECTED]
>
>
> --
> Darrick Hartman
> DJH Solutions, LLC
> http://www.djhsolutions.com
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2005.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> _______________________________________________
> Astlinux-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/astlinux-users
>
> Donations to support AstLinux are graciously accepted via PayPal to
> [EMAIL PROTECTED]
>
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Astlinux-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/astlinux-users

Donations to support AstLinux are graciously accepted via PayPal to [EMAIL 
PROTECTED]

Reply via email to