Philip Prindeville wrote: > More of the same. Who is sending the SIGINT signal to pppd???? > > Aug 10 11:04:23 pbx daemon.info pppd[3527]: Plugin /usr/lib/ppp/rp-pppoe.so > loaded. > Aug 10 11:04:23 pbx daemon.info pppd[3527]: RP-PPPoE plugin version 3.9 > compiled against pppd 2.4.4 > Aug 10 11:04:23 pbx daemon.notice pppd[3527]: pppd 2.4.4 started by root, uid > 0 > Aug 10 11:04:23 pbx daemon.info pppd[3527]: PPP session is 16609 (0x40e1) > Aug 10 11:04:23 pbx daemon.warn pppd[3527]: Connected to 00:0c:cf:5a:b4:54 > via interface w1ad > Aug 10 11:04:23 pbx daemon.info pppd[3527]: Using interface ppp0 > Aug 10 11:04:23 pbx daemon.notice pppd[3527]: Connect: ppp0 <--> w1ad > Aug 10 11:04:23 pbx daemon.warn pppd[3527]: Couldn't increase MTU to 1500 > Aug 10 11:04:23 pbx daemon.warn pppd[3527]: Couldn't increase MRU to 1500 > Aug 10 11:04:25 pbx daemon.notice pppd[3527]: PAP authentication succeeded > Aug 10 11:04:25 pbx daemon.notice pppd[3527]: peer from calling number > 00:0C:CF:5A:B4:54 authorized > Aug 10 11:04:25 pbx daemon.notice pppd[3527]: local IP address 63.224.43.239 > Aug 10 11:04:25 pbx daemon.notice pppd[3527]: remote IP address 63.231.10.208 > Aug 10 11:04:25 pbx daemon.notice pppd[3527]: primary DNS address > 205.171.3.65 > Aug 10 11:04:25 pbx daemon.notice pppd[3527]: secondary DNS address > 205.171.2.65 > Aug 10 14:34:00 pbx daemon.info pppd[3527]: Terminating on signal 2 > Aug 10 14:34:00 pbx daemon.info pppd[3527]: Connect time 209.6 minutes. > Aug 10 14:34:00 pbx daemon.info pppd[3527]: Sent 24587061 bytes, received > 36895304 bytes. > Aug 10 14:34:00 pbx daemon.warn pppd[3527]: Couldn't increase MTU to 1500 > Aug 10 14:34:00 pbx daemon.warn pppd[3527]: Couldn't increase MRU to 1500 > Aug 10 14:34:00 pbx daemon.notice pppd[3527]: Connection terminated. > Aug 10 14:34:00 pbx daemon.info pppd[3527]: Exit.
>> I'm wondering: (a) why is my PPP crapping out? There doesn't seem to be >> any serious errors, and (b) why doesn't the generated options file contain: >> >> maxfail=0 Philip, I doubt what you're seeing is specific to Astlinux. I also see no problem is adding a "maxfail=0" to the config file (I see no reason why a pppoe connection shouldn't just keep retrying instead of trying X times then failing and dying). You might have more luck on the rp-pppoe mailing list/forum. The "Couldn't increase MTU and MRU to 1500" lines look interesting though. Most PPPOE connctions use 1492 as the link-mtu. Darrick -- Darrick Hartman DJH Solutions, LLC http://www.djhsolutions.com http://www.djhsolutions.com/wiki ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED]
