Justin, 1) Make sure /mnt/kd/zaptel.conf is a plain file and not a symbolic link elsewhere.
2) Issue the following command: ls -la /oldroot/mnt/asturw/etc/ If there are any forms of zaptel.conf in /oldroot/mnt/asturw/etc/, remove them. 3) Then reboot. Hope that does it. Lonnie On Sep 4, 2008, at 8:28 AM, Justin Coffi wrote: > I moved the file from /etc/zaptel.conf to /mnt/kd/zaptel.conf and > reboot. Now the file information is stored in /mnt/kd/zaptel.conf but > ztcfg won't read it. Even if I use "ztcfg -vv -c /mnt/kd/zaptel.conf" > > Another challenge I'm facing: > I believe that I shouldn't have to run "modprobe wctdm24xxp" after > every > reboot. What am I doing wrong? > > Justin Coffi wrote: >> Thank you. You're a lifesaver. >> >> Lonnie Abelbeck wrote: >>> Justin, >>> >>> move your /etc/zaptel.conf to /mnt/kd/zaptel.conf and reboot. >>> >>> Lonnie >>> >>> On Sep 3, 2008, at 3:13 PM, Justin Coffi wrote: >>> >>> >>>> I've managed to get my TDM410P configured but my /etc/zaptel.conf >>>> settings aren't sticking after a reboot. Any suggestions? I have >>>> both >>>> unionfs and a keydisk configured. >>>> >>>> On Mon, Sep 1, 2008 at 11:41 PM, Darrick Hartman (lists) >>>> <[EMAIL PROTECTED]> wrote: >>>> >>>>> No problem. Looks like everything will work once you get the >>>>> zaptel.conf and zapata.conf files configured properly. The fxs >>>>> modules >>>>> are green. Do you have green or red modules? >>>>> >>>>> Clara Chan wrote: >>>>> >>>>>> My zaptel.conf consists of two lines >>>>>> >>>>>> loadzone=au >>>>>> fxoks=1-2 >>>>>> >>>>>> as I am using a TDM410P with 2 fxs modules in ports 1 and 2. >>>>>> >>>>>> I initiated the ztcfg -vv command again and received the >>>>>> following >>>>>> error >>>>>> >>>>>> Zaptel Version: 1.4.10.1 >>>>>> Echo Canceller: MG2 >>>>>> Configuration >>>>>> ====================== >>>>>> >>>>>> >>>>>> Channel map: >>>>>> >>>>>> Channel 01: FXO Kewlstart (Default) (Slaves: 01) >>>>>> Channel 02: FXO Kewlstart (Default) (Slaves: 02) >>>>>> >>>>>> 2 channels to configure. >>>>>> >>>>>> Changing signalling on channel 1 from Unused to FXO Kewlstart >>>>>> ZT_CHANCONFIG failed on channel 1: Invalid argument (22) >>>>>> Did you forget that FXS interfaces are configured with FXO >>>>>> signalling >>>>>> and that FXO interfaces use FXS signalling? >>>>>> >>>>>> The LEDs for the two activated ports on the Digium card is now >>>>>> lit. >>>>>> Will look into configuring zapata.conf >>>>>> >>>>>> Thanks heaps, Darrick. >>>>>> >>>>> -- >>>>> Darrick Hartman >>>>> DJH Solutions, LLC >>>>> http://www.djhsolutions.com >>>>> http://www.djhsolutions.com/wiki >>>>> >>>>> ------------------------------------------------------------------------- >>>>> >>>>> This SF.Net email is sponsored by the Moblin Your Move Developer's >>>>> challenge >>>>> Build the coolest Linux based applications with Moblin SDK & win >>>>> great prizes >>>>> Grand prize is a trip for two to an Open Source event anywhere in >>>>> the world >>>>> http://moblin-contest.org/redirect.php?banner_id=100&url=/ >>>>> _______________________________________________ >>>>> Astlinux-users mailing list >>>>> Astlinux-users@lists.sourceforge.net >>>>> https://lists.sourceforge.net/lists/listinfo/astlinux-users >>>>> >>>>> Donations to support AstLinux are graciously accepted via PayPal >>>>> to >>>>> [EMAIL PROTECTED] . >>>>> >>>>> >>>> ------------------------------------------------------------------------- >>>> >>>> This SF.Net email is sponsored by the Moblin Your Move Developer's >>>> challenge >>>> Build the coolest Linux based applications with Moblin SDK & win >>>> great prizes >>>> Grand prize is a trip for two to an Open Source event anywhere in >>>> the world >>>> http://moblin-contest.org/redirect.php?banner_id=100&url=/ >>>> _______________________________________________ >>>> Astlinux-users mailing list >>>> Astlinux-users@lists.sourceforge.net >>>> https://lists.sourceforge.net/lists/listinfo/astlinux-users >>>> >>>> Donations to support AstLinux are graciously accepted via PayPal to >>>> [EMAIL PROTECTED] . >>>> >>>> >>> >>> >>> ------------------------------------------------------------------------- >>> >>> This SF.Net email is sponsored by the Moblin Your Move Developer's >>> challenge >>> Build the coolest Linux based applications with Moblin SDK & win >>> great prizes >>> Grand prize is a trip for two to an Open Source event anywhere in >>> the >>> world >>> http://moblin-contest.org/redirect.php?banner_id=100&url=/ >>> _______________________________________________ >>> Astlinux-users mailing list >>> Astlinux-users@lists.sourceforge.net >>> https://lists.sourceforge.net/lists/listinfo/astlinux-users >>> >>> Donations to support AstLinux are graciously accepted via PayPal to >>> [EMAIL PROTECTED] >>> >> > > ------------------------------------------------------------------------- > This SF.Net email is sponsored by the Moblin Your Move Developer's > challenge > Build the coolest Linux based applications with Moblin SDK & win > great prizes > Grand prize is a trip for two to an Open Source event anywhere in > the world > http://moblin-contest.org/redirect.php?banner_id=100&url=/ > _______________________________________________ > Astlinux-users mailing list > Astlinux-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/astlinux-users > > Donations to support AstLinux are graciously accepted via PayPal to [EMAIL > PROTECTED] > . > ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED]
