While most packages support and work with the make PACKAGE-clean
/PACKAGE-dirclean, this doesn't automatically clean up dependencies.
The safest thing to do is do an rm -rf on the build_iX86 directory.
Philip Prindeville wrote:
> No, that's unrelated.
>
> But the wanpipe stuff is pretty darn broken.
>
> Try doing a "make wanpipe-clean wanpipe-dirclean" and then continue your
> build.
>
> Sometimes it works.
>
> If it still doesn't, edit package/wanpipe/wanpipe.mk and change
> WANPIPE_VER to 3.3.10, then repeat as above.
>
> -Philip
>
>
> Justin Coffi wrote:
>> This might be related, or it might not be, but I just tried to compile
>> rev. 1956 and it failed 30 minutes in with
>>
>> "./Setup drivers
>> --builddir=/media/disk/Downloads/astlinux-0.6/build_i586/wanpipe-3.3.10/ast_build_dir
>> --with-linux=/media/disk/Downloads/astlinux-0.6/build_i586/linux-2.6.20.21-astlinux
>> --zaptel-path=/media/disk/Downloads/astlinux-0.6/build_i586/zaptel-1.4.10.1/kernel
>>
>> --usr-cc=/media/disk/Downloads/astlinux-0.6/build_i586/staging_dir/bin/i586-linux-uclibc-gcc
>> --protocol=DEF-TDM --no-zaptel-compile --noautostart --arch=i386
>> --silent
>> ./Setup: 1357: Syntax error: "(" unexpected
>> make[1]: *** [all_bin_kmod] Error 2
>> make[1]: Leaving directory
>> `/media/disk/Downloads/astlinux-0.6/build_i586/wanpipe-3.3.10'
>> make: ***
>> [/media/disk/Downloads/astlinux-0.6/build_i586/wanpipe-3.3.10/.built]
>> Error 2"
>>
>> On Fri, 12, 2008 at 5:46 PM, Philip Prindeville
>> <[EMAIL PROTECTED]> wrote:
>>
>>> David Kerr wrote:
>>>
>>>> What is the right way to build after I do a "svn update" ? A few days
>>>> ago I pulled the 0.6 branch and it build cleanly (except for the
>>>> asterisk-gui problem that I reported the other day). Today I did an
>>>> svn update and it pulled down a few updated files (including a fix to
>>>> asterisk-gui, nice thank you). But I run into two problems...
>>>>
>>>> First, while building asterisk-gui it halts stating that manager.conf
>>>> has already been patched and askes me whether to assume -R. it
>>>> defaults to no. Which turned out to be wrong, so I tried again and
>>>> said yes. But I don't know what -R does?
>>>>
>>>> Second, sometime later, I get the following and I don't know what to do.
>>>>
>>>> # Use fakeroot so genext2fs believes the previous fakery
>>>> INITRD_GENEXT2_REALSIZE=`LANG=C du -l -s -c -k
>>>> /home/david/astlinux0.6/astlinux-0.6/build_i586/initrd | grep total |
>>>> sed -e "s/total//"`; \
>>>> INITRD_GENEXT2_ADDTOROOTSIZE=`if [ $INITRD_GENEXT2_REALSIZE
>>>> -ge 20000 ] ; then echo 16384; else echo 2400; fi`; \
>>>> INITRD_GENEXT2_SIZE=`expr $INITRD_GENEXT2_REALSIZE +
>>>> $INITRD_GENEXT2_ADDTOROOTSIZE`; \
>>>> INITRD_GENEXT2_ADDTOINODESIZE=`find
>>>> /home/david/astlinux0.6/astlinux-0.6/build_i586/initrd | wc -l`; \
>>>> INITRD_GENEXT2_INODES=`expr $INITRD_GENEXT2_ADDTOINODESIZE +
>>>> 400`; \
>>>> set -x; \
>>>>
>>>> /home/david/astlinux0.6/astlinux-0.6/build_i586/staging_dir/usr/bin/fakeroot
>>>> \
>>>> -i
>>>> /home/david/astlinux0.6/astlinux-0.6/build_i586/staging_dir/fakeroot.env \
>>>> -s
>>>> /home/david/astlinux0.6/astlinux-0.6/build_i586/staging_dir/fakeroot.env
>>>> -- \
>>>>
>>>> /home/david/astlinux0.6/astlinux-0.6/build_i586/genext2fs-1.4/genext2fs \
>>>> -b $INITRD_GENEXT2_SIZE \
>>>> -i $INITRD_GENEXT2_INODES \
>>>> -d
>>>> /home/david/astlinux0.6/astlinux-0.6/build_i586/initrd \
>>>> -U initrd.img
>>>> +
>>>> /home/david/astlinux0.6/astlinux-0.6/build_i586/staging_dir/usr/bin/fakeroot
>>>> -i
>>>> /home/david/astlinux0.6/astlinux-0.6/build_i586/staging_dir/fakeroot.env
>>>> -s
>>>> /home/david/astlinux0.6/astlinux-0.6/build_i586/staging_dir/fakeroot.env
>>>> --
>>>> /home/david/astlinux0.6/astlinux-0.6/build_i586/genext2fs-1.4/genext2fs
>>>> -b 5148 -i 712 -d
>>>> /home/david/astlinux0.6/astlinux-0.6/build_i586/initrd -U initrd.img
>>>> /home/david/astlinux0.6/astlinux-0.6/build_i586/genext2fs-1.4/genext2fs:
>>>> /home/david/astlinux0.6/astlinux-0.6/build_i586/genext2fs-1.4/genext2fs:busybox:
>>>> Invalid argument
>>>> make: *** [initrd.img] Error 1
>>>>
>>>> I know I could erase everything, pull the 0.6 branch again, and build
>>>> the lot all over again and it would probably build cleanly. But that
>>>> would take several hours and shouldn't be necessary for simply
>>>> updating a couple of files.
>>>>
>>>> What should I do to get a successful (incremental, not a recompile
>>>> everything) build after an svn update?
>>>>
>>>> Thanks
>>>> David
>>>>
>>> That's a known issue and I'd like to fix it but haven't had time.
>>>
>>> After an "svn update", you can do either:
>>>
>>> make clean
>>>
>>> but that's pretty brutal. The contents of "toolchain" rarely change, so
>>> I wouldn't bother zapping that unless you see a posting suggesting
>>> otherwise.
>>>
>>> You can also do:
>>>
>>> rm -rf build_i586/
>>>
>>> which just zaps the package builds, not the tools.
>>>
>>> Lastly, for the exact issue you are seeing above, I'd just do:
>>>
>>> rm -rf asterisk-clean asterisk-dirclean asterisk-gui-clean
>>> asterisk-gui-dirclean webinterface-clean webinterface-dirclean
>>>
>>> ... this is because manager.conf gets installed by asterisk, but then
>>> updated twice by asterisk-gui and webinterface which "layer on" patches
>>> to it. This step resets everything back to zero.
>>>
>>> Let me know if you're still having issues.
>>>
>>> -Philip
>>>
>
>
> -------------------------------------------------------------------------
> This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
> Build the coolest Linux based applications with Moblin SDK & win great prizes
> Grand prize is a trip for two to an Open Source event anywhere in the world
> http://moblin-contest.org/redirect.php?banner_id=100&url=/
> _______________________________________________
> Astlinux-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/astlinux-users
>
> Donations to support AstLinux are graciously accepted via PayPal to [EMAIL
> PROTECTED]
--
Darrick Hartman
DJH Solutions, LLC
http://www.djhsolutions.com
Small Business IT Specialists
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Astlinux-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to [EMAIL
PROTECTED]
