[Version 1.2.06] 1) A new feature allows the arno firewall to be edited with a gui. This feature requires astLinux version 0.6 and later, or builds since June 2008.
One or more internal interfaces must be defined for the firewall to be active. The Network tab has a new section... Firewall Configuration: Arno Firewall: [Edit Firewall Config...] When the [Edit Firewall Config...] button is selected, the Firewall Configuration is shown. After firewall rules are defined and saved, the [Restart Firewall] button will make the rules active without the need to reboot the system. Clicking the the [ + ] at the left of each rule will load the input fields with that rule's values. Make changes and then [Save Settings]. The original rule will remain, if that is not desired, simply delete the original rule. Any firewall rule may be 'Disabled' without deleting, by checking the box under the Disabled column, and then click [Save Settings] and then [Restart Firewall]. Remember that new firewall rules are not applied until after a [Restart Firewall]. Be sure to test each firewall rule before it is placed into production. Downloads and Info: http://lonnie.abelbeck.com/astlinux/info/webgui.php Enjoy, Lonnie ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED]
