> >> Yes, that's correct. Those two modules would need to be added. >I'm saying > >> it's worth the size of the modules. We'll put it on the list to do. The >>> Prolific usb/serial device is one of the more popular ones that's >>> compatible with Linux and it should only add a few hundred kb to the total >>> build. >>> >>> Darrick >>> >> >> Thanks Darrick, >> >> that would make some of my projects MUCH easier, >> not to have to fiddle with much too short serial >> adapter cables, drilling, and so on. >> >> Maybe "usbcore" is also needed. Can't find it on 0.6.2. >> >> Michael >> > >Committing to trunk... #2229. I didn't enable everything. Just: > >+CONFIG_USB_SERIAL=m >+CONFIG_USB_SERIAL_GENERIC=y >+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m >+CONFIG_USB_SERIAL_FTDI_SIO=m >+CONFIG_USB_SERIAL_IR=m >+CONFIG_USB_SERIAL_GARMIN=m >+CONFIG_USB_SERIAL_PL2303=m >+CONFIG_USB_SERIAL_OTI6858=m >+CONFIG_USB_SERIAL_OPTION=m >+CONFIG_USB_SERIAL_DEBUG=m > > >Already forgotten what USB_SERIAL_OPTION does... Oh, hang on. That's >not very handy. I'll back that last one out... > >-Philip
Hi Philip + Darrick, I successfully built myself a svn (rev. 2234) image from the 0.6-branch (couldn't get trunk running). The usb2serial-adapter works well (geni586 + net4801) when you plug it into the RUNNING box. It is then attached to "/dev/ttyUSB0" (with 9600 baud). -------------- usb 1-1: new full speed USB device using ohci_hcd and address 4 usb 1-1: configuration #1 chosen from 1 choice pl2303 1-1:1.0: pl2303 converter detected usb 1-1: pl2303 converter now attached to ttyUSB0 ------------- But after a reboot it is gone. You have to replug it to make it work again. Michael -- Email: mailto:mkeu...@web.de ------------------------------------------------------------------------------ _______________________________________________ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to pay...@krisk.org.
