> > I have a box with which I was experimenting with multiple external > > interfaces. I now want to deploy it on an internal network (in other > > words, with an external gateway, firewall, etc). I've previously done > > this with other boxes by only assigning EXTIF (with a LAN address). > > I've therefore removed settings for INTIF and EXT2IF. However, I > > cannot now ping anything beyond the LAN. If I explicitly use eth0 with > > "ping -I eth0" I can ping outside the LAN. In addition, route shows > > remnants of eth2's previous static (routable) IP address which I have > > tried to delete.
> For clarification, can you specify which version of Astlinux you are using? Currently 0.6.1. Is a remote upgrade possible, and if so, what's the process? Tom ------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword _______________________________________________ Astlinux-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [email protected].
