Hello,
An astlinux newbie here though not new to Linux in general. I've set up the
latest version of astlinux (0.6.5) on a compact flash card running on a
soekris 4801. Everything is running fine, and I can manage the setup via
the webapp, obviously though I'm missing something fairly fundamental about
the astlinux setup.
In Redhat, Ubuntu or whatever Linux, routes can be setup to persist in an
rc.local (via calls to 'route add .' ) Certainly I see that for astlinux
rc.conf is the main setup file, though it's not yet clear to me how to add
routes such that they will live on after a reboot. How may this be done
with astlinux?
If anyone could give me a pointer or two in this regard I would be very much
appreciative.
Thanks!!
Mark
Mark Ganter
[email protected]
------------------------------------------------------------------------------
The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your
production scanning environment may not be a perfect world - but thanks to
Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700
Series Scanner you'll get full speed at 300 dpi even with all image
processing features enabled. http://p.sf.net/sfu/kodak-com
_______________________________________________
Astlinux-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to
[email protected].
