Tom, mISDN is a bit of an unknown to most of the developers. We don't have hardware of facilities to test mISDN so we're going on what other people tell us works or does not work. There are a few people on this list who have various mISDN hardware working in one way or another on Astlinux 0.6.x. Perhaps one of those people can speak up.
As to the version, look in the svn repository for 0.6. Looks like we're using 1.1.7 in the 0.6 branch. We've moved to 1.1.9.2 in trunk. I can bump the version to 1.1.9.2 before doing the 0.6.7 release if there is enough desire to do so. Like I said earlier, about all we can do is make sure the modules compile properly. Darrick Tom Chadwin wrote: > Anyone? How do the Astlinux init scripts load up the drivers for ISDN > hardware? Do they modprobe them using the argument ISDN_MODPROBE from > rc.conf/user.conf, or do they use the info in misdn-init.conf? > > On-site again tomorrow, so I'd really like to make some progress on this. > > Thanks > > Tom > > >> Apologies: Astlinux 0.6.6. Any ideas on the error message? > >> Looking into this further, I do have a specific question which might >> possibly be relevant. Looking at the hfcmulti driver documentation >> for non-Astlinux Asterisk installations, they describe modprobe >> hfcmulti as being one way of getting up and running, and misdn-init >> as another. >> >> I have copied the ISDN_MODPROBE hfcmulti line from rc.conf into >> user.conf (uncommented, obviously), and the 'protocol' parameter >> on this command line allows me to specify whether each port on >> the B200M is operating in TE or NT mode, and in PTP or PTMP mode. >> >> However, I also seem to have the file misdn-init.conf, and this file also >> allows me to specify the same information (for example, te_ptmp=1,2). >> Which of these two is, in fact, used to set the mode of the ports? > > >>> Would be useful to know what version of software you're running... > >>>> I'm on-site, trying to install an Astlinux box (Soekris net5501 + >>>> OpenVox B200M), connecting it to 2 BRI circuits. I am getting the >>>> following error after booting completes: >>>> >>>> MDL_ERROR|REQ (tei_l2) >>>> >>>> The error appears twice, and I cannot get outgoing or incoming calls >>>> on on the BRIs to work. > > ------------------------------------------------------------------------------ > Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day > trial. Simplify your report design, integration and deployment - and focus on > what you do best, core application coding. Discover what's new with > Crystal Reports now. http://p.sf.net/sfu/bobj-july > _______________________________________________ > Astlinux-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/astlinux-users > > Donations to support AstLinux are graciously accepted via PayPal to > [email protected]. ------------------------------------------------------------------------------ Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day trial. Simplify your report design, integration and deployment - and focus on what you do best, core application coding. Discover what's new with Crystal Reports now. http://p.sf.net/sfu/bobj-july _______________________________________________ Astlinux-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [email protected].
