I tried to create a disk.img and then install it to a hard drive.. but I
get the following errors..
I ran the command./makeimage 2048 to make a 2 gig image.. I first tried to
make a 15 gig image then re-tried to make 1 2 gig...
Below is the end of my console output on my dev machine where it gives me
errors...
-Christopher
Expert command (m for help):
Command (m for help): Command action
e extended
p primary partition (1-4)
Partition number (1-4): First cylinder (1-4161, default 1): Using default
value 1
Last cylinder or +size or +sizeM or +sizeK (1-4161, default 4161): Using
default value 4161
Command (m for help): The partition table has been altered!
Calling ioctl() to re-read partition table.
WARNING: Re-reading the partition table failed with error 22: Invalid
argument.
The kernel still uses the old table.
The new table will be used at the next reboot.
Syncing disks.
Probing devices to guess BIOS drives. This may take a long time.
Unknown partition table signature
GNU GRUB version 0.97 (640K lower / 3072K upper memory)
[ Minimal BASH-like line editing is supported. For the first word, TAB
lists possible command completions. Anywhere else TAB lists the possible
completions of a device/filename.]
grub> device (hd0) /dev/loop0
grub> root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
grub> setup (hd0)
Checking if "/boot/grub/stage1" exists... no
Checking if "/grub/stage1" exists... no
Error 15: File not found
grub> quit
Done.
[r...@develserver 0.7]#
-----Original Message-----
From: Tom Chadwin [mailto:[email protected]]
Sent: Friday, December 04, 2009 5:49 AM
To: AstLinux Users Mailing List
Subject: Re: [Astlinux-users] make menuconfig file for 0.7?
Hi Chris
Do I remember someone saying that the Install option on the ISO image
was not working? If not, I apologize, but it rings the faintest of
bells (from some time ago, it must be said).
The way I first installed Astlinux way back was physically to take the
HD out of a desktop and plug it in as a slave on an existing PC, then
use physdiskwrite as though it were a CF card. Extreme, but it did
work.
Hope you get further
Tom
On Thu, Dec 3, 2009 at 8:58 PM, Chris Abnett <[email protected]> wrote:
> Got that far... this is first time I have ever tried to use this on a
> regular PC and not an embedded environment.. in those cases I use the CF
> image and runnix... so I thought it be easy... take the ISO, burn a CD,
> boot the CD and then type astinstall... but I get errored out after I
> select my hard drive.. /dev/had the hard drive is brand new with all
> partitions deleted... the screen will say "cleaning up : and under the
> bluwi get the following errors:
>
> Touch: /tmp/runnix/os/astflag no such file or directory
> Umount: cant umount /tmp/runnix invalid argument.
>
> Is there another procedure I should use to set up on a regular PC with a
> hard drive?
> -Christopher
>
> -----Original Message-----
> From: Lonnie Abelbeck [mailto:[email protected]]
> Sent: Thursday, December 03, 2009 1:56 PM
> To: AstLinux Users Mailing List
> Subject: Re: [Astlinux-users] make menuconfig file for 0.7?
>
> Christopher,
>
> In the build environment:
> The default config is in astlinux.config, copy it to .config and then
"make
> menuconfig"
>
> Lonnie
>
> On Dec 3, 2009, at 12:37 PM, Chris Abnett wrote:
>
>> Does anyone have the default .config file created that you made the 0.7
> beta
>> images with? im having issues comiling and figure it is because I have
>> options incorrect and I want to see if the default x86 will compile on my
>> machine.. its been a long time since I did a build.. lots has changed
> from
>> 0.6 to 0.7
>>
>> -Christopher
>
>
>
----------------------------------------------------------------------------
> --
> Join us December 9, 2009 for the Red Hat Virtual Experience,
> a free event focused on virtualization and cloud computing.
> Attend in-depth sessions from your desk. Your couch. Anywhere.
> http://p.sf.net/sfu/redhat-sfdev2dev
> _______________________________________________
> Astlinux-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/astlinux-users
>
> Donations to support AstLinux are graciously accepted via PayPal to
> [email protected].
>
>
>
----------------------------------------------------------------------------
--
> Join us December 9, 2009 for the Red Hat Virtual Experience,
> a free event focused on virtualization and cloud computing.
> Attend in-depth sessions from your desk. Your couch. Anywhere.
> http://p.sf.net/sfu/redhat-sfdev2dev
> _______________________________________________
> Astlinux-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/astlinux-users
>
> Donations to support AstLinux are graciously accepted via PayPal to
[email protected].
>
----------------------------------------------------------------------------
--
Join us December 9, 2009 for the Red Hat Virtual Experience,
a free event focused on virtualization and cloud computing.
Attend in-depth sessions from your desk. Your couch. Anywhere.
http://p.sf.net/sfu/redhat-sfdev2dev
_______________________________________________
Astlinux-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to
[email protected].
------------------------------------------------------------------------------
Join us December 9, 2009 for the Red Hat Virtual Experience,
a free event focused on virtualization and cloud computing.
Attend in-depth sessions from your desk. Your couch. Anywhere.
http://p.sf.net/sfu/redhat-sfdev2dev
_______________________________________________
Astlinux-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to
[email protected].
