Currently on the Status page (plus a couple of others - Speed Dials
comes to mind) I'm getting the error message "The "manager.conf" file is
not enabled for 127.0.0.1 on port 5038."

A quick check of manager.conf indicates that the manager interface /is/
enabled for the web interface.  The following section is here:-

[webinterface]
secret = webinterface
deny = 0.0.0.0/0.0.0.0
permit = 127.0.0.1/255.255.255.255
read = command
write = command

The only thing I can think of is that the required access for Astlinux
have changed, but since I've modified my manager.conf (to include
another user) I'm left with the old setup for the web interface.  A
"manager show user webinterface" in the Asterisk CLI shows the following:-

pbx*CLI> manager show user webinterface
pbx*CLI>
       username: webinterface
         secret: <Set>
           deny: 0.0.0.0/0.0.0.0
         permit: 127.0.0.1/255.255.255.255
           read: command
          write: command
displayconnects: no

...so Asterisk /does/ know about the user.  Can anyone shed any light on
this?
------------------------------------------------------------------------------
Download Intel&#174; Parallel Studio Eval
Try the new software tools for yourself. Speed compiling, find bugs
proactively, and fine-tune applications for parallel performance.
See why Intel Parallel Studio got high marks during beta.
http://p.sf.net/sfu/intel-sw-dev
_______________________________________________
Astlinux-users mailing list
Astlinux-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/astlinux-users

Donations to support AstLinux are graciously accepted via PayPal to 
pay...@krisk.org.

Reply via email to