Thanks, done that and it works. Cheers
Michael Philip A. Prindeville wrote: > Put it in /mnt/kd/rc.elocal > > > > On 04/14/2010 01:34 AM, Michael wrote: >> Hello >> >> I use Astlinux on an Alix2 box within my home LAN. Eth0 is connected to >> my ADSL router and eth1 to my Sapura 3000. Both are, of course, on >> different subnets. >> >> The ADSL router is configured with the necessary routes to connect to the >> eth1 subnet of the alix box. >> >> What is missing, however, is that ip_forward is not set to "yes" on >> Astlinux, so eth0 and eth1 are not connected. I can't reach the Sapura >> box from the ADSL router. >> >> It works fine if I ssh into astlinux and echo 1 > >> /proc/sys/net/ipv4/ip_forward. >> >> Is there somewhere a setting in the gui or in the conf files to make that >> sticky? I haven't found it so far. >> >> Thanks >> >> Michael >> >> P.S.: The firewall is off. I don't need it within my LAN. >> > > > ------------------------------------------------------------------------------ > Download Intel® Parallel Studio Eval > Try the new software tools for yourself. Speed compiling, find bugs > proactively, and fine-tune applications for parallel performance. > See why Intel Parallel Studio got high marks during beta. > http://p.sf.net/sfu/intel-sw-dev ------------------------------------------------------------------------------ Download Intel® Parallel Studio Eval Try the new software tools for yourself. Speed compiling, find bugs proactively, and fine-tune applications for parallel performance. See why Intel Parallel Studio got high marks during beta. http://p.sf.net/sfu/intel-sw-dev _______________________________________________ Astlinux-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [email protected].
