---------- Forwarded message ---------- From: Jamshaid Anwar <[email protected]> Date: Sat, Jun 23, 2012 at 10:05 AM Subject: accessing usb card from net5501 To: [email protected], [email protected], [email protected]
hellow i have successfully installed astlinux image on net5501, now in order to write things on system, i was trying to make this usb port work. i plug a usb in the port and then give the command 'genkd' . but i get this type of error ... pbx ~ # usb 1-1: new high speed USB device using ehci_hcd and address 3 scsi3 : usb-storage 1-1:1.0 scsi 3:0:0:0: Direct-Access Kingston DT 101 II PMAP PQ: 0 ANSI: 0 CCS sd 3:0:0:0: [sdc] 7936000 512-byte logical blocks: (4.06 GB/3.78 GiB) sd 3:0:0:0: [sdc] Write Protect is off sd 3:0:0:0: [sdc] Assuming drive cache: write through sd 3:0:0:0: [sdc] Assuming drive cache: write through sdc: sdc1 sd 3:0:0:0: [sdc] Assuming drive cache: write through sd 3:0:0:0: [sdc] Attached SCSI removable disk pbx ~ # genkd A filesystem on /dev/sda1 is mounted. Aborting. pbx ~ # can i have any help with this ?? regards, Jamshaid Anwar ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Astlinux-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [email protected].
