Lonnie,
Thats what I did I. I created the file under /mnt/kd/sensors.conf and here
is what I get:
pbx ~ # sensors
No sensors found!
Make sure you loaded all the kernel drivers you need.
Try sensors-detect to find out which these are.
Thanks
Thank You,
Fernando Fuentes
DIGITALVOIPNET.COM
On Wed, Nov 14, 2012 at 12:32 PM, Lonnie Abelbeck <[email protected]
> wrote:
> Fernando,
>
> By "Hardware monitoring is not working", what do you mean ?
>
> It should be as simple as following this:
> http://doc.astlinux.org/userdoc:board_jetway_nf9hql-525
>
> What does typing "sensors" from the CLI display ?
>
> Lonnie
>
>
> On Nov 14, 2012, at 12:22 PM, Fernando F. wrote:
>
> > Lonnie,
> >
> > Thanks for your input. I am going to try it out and remove pfsense out
> of the network and replace it with Astlinux.
> > I follow your guide and the Hardware monitoring is not working even with
> your sensors.conf.
> > Any ideas?
> >
> > TIA.
> >
> >
> > Thank You,
> >
> > Fernando Fuentes
> > DIGITALVOIPNET.COM
> >
> >
> >
> >
> > On Wed, Nov 14, 2012 at 11:56 AM, Lonnie Abelbeck <
> [email protected]> wrote:
> > Fernando,
> >
> > Placing AstLinux at the edge of your network acting as your Firewall
> (Router, VPN, DNS, etc.) plus PBX is a great solution. This is what I do
> in my personal installations. An extra benefit is to give Asterisk a
> public IPv4 address without NAT at the server end, which simplifies the
> configuration for remote SIP client access, particularly if the public IPv4
> is dynamic.
> >
> > Clearly our Firewall tab is not pfsense, but AstLinux should be able to
> do the core firewall features pfsense provides. If any are missing be sure
> to let us know here.
> >
> > As far as an Atom board being overkill for AstLinux, a few random
> thoughts:
> >
> > 1) Here in the US, DOCSIS 3.0 cable modems are now offering 100 Mbps
> down, that data rate alone will max-out an Alix or net5501 box.
> >
> > 2) A 1.8GHz Dual Core Atom board can route 1 Gbps between interfaces
> with over 50% CPU left over for Asterisk and other services.
> >
> > 3) My testing has demonstrated that a multi-core CPU is particularly
> helpful in embedded applications like AstLinux, things runs more smoothly
> when processes are spread across 4x CPUs (including hyper-threading),
> particularly noticed for latency sensitive applications like VoIP.
> >
> > 4) When given the extra CPU power of the Atom, as Michael Knill noted,
> CODEC transcoding is now more practical, Zabbix proxy services, many VPN
> sessions, etc. either run better or were not practical on slower hardware.
> >
> > 5) Price, by virtue of economies of scale, the Atom boards give you a
> lot for the money, just as an example the Jetway NF9HQL-525 (board only) is
> about $190 US, while the net5501-70 (board only) is $254 US. The 1.8GHz
> Intel dual-core Atom will execute about 3-4x faster than the 500 Mhz AMD
> single-core Geode, the NF9HQL-525 4x NIC's are 1Gb PCIe while the net5501
> 4x NIC's are 100 Mb PCI. To be fair, for the record I am comparing a newly
> released board with a board 5 years old.
> >
> > 6) Power consumption, provided the Atom board is designed for networking
> use (ex. not video playback), they are sill quite efficient, as low as 15
> Watts idle vs. 9 Watts idle for the net5501.
> >
> >
> > IMHO, combining your pfsense with your PBX via a single AstLinux box on
> a Jetway Atom board is a more practical project then trying to run VMware
> on the same board.
> >
> > Lonnie
> >
> >
> > On Nov 13, 2012, at 11:24 PM, Michael Knill wrote:
> >
> > > For a firewall maybe. To give you flexibility on what you can do then
> no.
> > > My ALIX box uses 30% CPU with 40ms delay when I transcode from ILBC to
> G.711. Yes I could use G.729 and not transcode but ILBC is better and I
> want this flexibility.
> > >
> > > Regards
> > > Michael Knill
> > >
> > >
> > >
> > >
> > > On 14/11/2012, at 4:02 PM, Fernando F. wrote:
> > >
> > >> Team....
> > >>
> > >> So my project with the Jetway NF9HQL-525 Dual Core Atom failed. I was
> hoping to run ESXi 5.1 and every time I try to boot ast-linux it kernel
> panic so I decided to just fully load astlinux to CF and go that route...
> > >>
> > >> I am seeking recommendations from the list...
> > >>
> > >> Is this board over kill for just Ast-Linux?
> > >> Should I attempt to replace my pfsense box with astlinux?
> > >>
> > >> Any recommendations or thoughts?
> > >>
> > >> Fernando Fuentes
> > >> DIGITALVOIPNET.COM
> >
> >
> >
> ------------------------------------------------------------------------------
> > Monitor your physical, virtual and cloud infrastructure from a single
> > web console. Get in-depth insight into apps, servers, databases, vmware,
> > SAP, cloud infrastructure, etc. Download 30-day Free Trial.
> > Pricing starts from $795 for 25 servers or applications!
> > http://p.sf.net/sfu/zoho_dev2dev_nov
> > _______________________________________________
> > Astlinux-users mailing list
> > [email protected]
> > https://lists.sourceforge.net/lists/listinfo/astlinux-users
> >
> > Donations to support AstLinux are graciously accepted via PayPal to
> [email protected].
> >
> >
> ------------------------------------------------------------------------------
> > Monitor your physical, virtual and cloud infrastructure from a single
> > web console. Get in-depth insight into apps, servers, databases, vmware,
> > SAP, cloud infrastructure, etc. Download 30-day Free Trial.
> > Pricing starts from $795 for 25 servers or applications!
> >
> http://p.sf.net/sfu/zoho_dev2dev_nov_______________________________________________
> > Astlinux-users mailing list
> > [email protected]
> > https://lists.sourceforge.net/lists/listinfo/astlinux-users
> >
> > Donations to support AstLinux are graciously accepted via PayPal to
> [email protected].
>
>
>
> ------------------------------------------------------------------------------
> Monitor your physical, virtual and cloud infrastructure from a single
> web console. Get in-depth insight into apps, servers, databases, vmware,
> SAP, cloud infrastructure, etc. Download 30-day Free Trial.
> Pricing starts from $795 for 25 servers or applications!
> http://p.sf.net/sfu/zoho_dev2dev_nov
> _______________________________________________
> Astlinux-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/astlinux-users
>
> Donations to support AstLinux are graciously accepted via PayPal to
> [email protected].
>
------------------------------------------------------------------------------
Monitor your physical, virtual and cloud infrastructure from a single
web console. Get in-depth insight into apps, servers, databases, vmware,
SAP, cloud infrastructure, etc. Download 30-day Free Trial.
Pricing starts from $795 for 25 servers or applications!
http://p.sf.net/sfu/zoho_dev2dev_nov
_______________________________________________
Astlinux-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to
[email protected].
