Hi brahim, I have not tested either of those boards, while I would expect either to work, no guarantees.
You will want to use the "Generic i586 Serial" (geni586-serial) version of AstLinux I was looking at the docs for that board: http://downloads.openvox.cn/pub/misc/IPC110%20Hardware%20Installation%20Guide%20v1.0.03.pdf No mention on the exact ethernet hardware, but if they claim it works with M0n0wall 1.33 then it can't be anything too unusual. Can you purchase the board under the condition it works with AstLinux ? The IPC110 / IPC100 defaults to a serial console baud rate of 115200, AstLinux uses 19200 by default. According to the docs on startup type F4 (<ESC>OS) to enter the BIOS Setup to change the console baud rate, similar to the Jetway NF9HQL-525 board: http://doc.astlinux.org/userdoc:board_jetway_nf9hql-525 If you decide to give it a try, please report back here to report your results. Lonnie On Feb 20, 2013, at 5:07 AM, brahim karem wrote: > Hello, > I want to be sure that astlinux is supported by Openvox Modherboard IPC110 / > IPC100. > thank you ------------------------------------------------------------------------------ Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_d2d_feb _______________________________________________ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to pay...@krisk.org.
